Skip to content

Glink native fixes upstreaming

Deepak Kumar Singh linux-arm-msm linux-remoteproc lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 6 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/6rpmsg: glink: fix destroy channel endpoint logicdrivers/rpmsg/qcom_glink_native.c+4 -01 reply
2/6rpmsg: glink: Deny intent request if reusable intent fitsdrivers/rpmsg/qcom_glink_native.c+16 -11 reply
3/6rpmsg: glink: Add TX_DATA_CONT command while sendingdrivers/rpmsg/qcom_glink_native.c+34 -41 reply
4/6rpmsg: glink: Remove the rpmsg dev in close_ackdrivers/rpmsg/qcom_glink_native.c+12 -01 reply
5/6rpmsg: glink: Remove channel decouple from rpdev releasedrivers/rpmsg/qcom_glink_native.c+0 -21 reply
6/6rpmsg: glink: Send READ_NOTIFY command in FIFO full casedrivers/rpmsg/qcom_glink_native.c+35 -11 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH V1 0/6] Glink native fixes upstreaming

Includes fixes for -
Few race conditions while channel release and close Proper unregistration of rpmsg device to avoid use of stale device Send notify command to remote when glink fifo is full Handling packet size larger that 16K

Arun Kumar Neelakantam (3):
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Remove the rpmsg dev in close_ack
rpmsg: glink: Send READ_NOTIFY command in FIFO full case

Chris Lew (2):
rpmsg: glink: Deny intent request if reusable intent fits
rpmsg: glink: Remove channel decouple from rpdev release

Konstantin Dorfman (1):
rpmsg: glink: fix destroy channel endpoint logic

 drivers/rpmsg/qcom_glink_native.c | 109 +++++++++++++++++++++++++++++++++++---
 1 file changed, 101 insertions(+), 8 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project