Skip to content

ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO

Wen Gong ath10k linux-wireless 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ath10k: add wmi service peer stat info for wmi tlvdrivers/net/wireless/ath/ath10k/wmi-tlv.h+2 -01 reply
2/3ath10k: remove return for NL80211_STA_INFO_TX_BITRATEdrivers/net/wireless/ath/ath10k/mac.c+10 -110 replies
3/3ath10k: enable supports_peer_stats_info for QCA6174 PCI devicesdrivers/net/wireless/ath/ath10k/core.c+1 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] ath10k: correct tx/rx bitrate for QCA6174 PCIe and SDIO

iw wlan0 station dump not show the correct tx/rx bitrate of QCA6174 PCIe and SDIO, it is because it has 1 check for WMI_SERVICE_PEER_STATS and 1 return for empty arsta->txrate, so change to pass the check and remove the return, then iw wlan0 station dump show correct tx/rx bitrate for QCA6174 SDIO.

After that, set true for supports_peer_stats_info of QCA6174 PCIe, then it show same correct tx/rx bitrate.

Wen Gong (3):
ath10k: add wmi service peer stat info for wmi tlv
ath10k: remove return for NL80211_STA_INFO_TX_BITRATE
ath10k: enable supports_peer_stats_info for QCA6174 PCI devices

 drivers/net/wireless/ath/ath10k/core.c    |  1 +
 drivers/net/wireless/ath/ath10k/mac.c     | 21 ++++++++++-----------
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  2 ++
 3 files changed, 13 insertions(+), 11 deletions(-)
Signature · 1 line
2.23.0