Skip to content

PCI: Add new Unisoc PCIe driver

Hongtao Wu linux-devicetree linux-pci lkml 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest2 patches 2 repliesIn review
  2. v5 posting 2/22 patches 5 repliesSuperseded
  3. v5 posting 1/22 patches 1 replySuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v42 patches1 replySuperseded
v32 patches4 repliesSuperseded
v22 patches1 replySuperseded
v12 patches3 repliesSuperseded

Changes in v6 from the cover letter

1) Change "GPL v2" to "GPL".
2) Remove exit_p wrapper which used to define remove callback.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controllerDocumentation/devicetree/bindings/pci/sprd-pcie.yaml+93 -00 replies
2/2PCI: sprd: Add support for Unisoc SoCs' PCIe controllerdrivers/pci/controller/dwc/Kconfig drivers/pci/controller/dwc/Makefile drivers/pci/controller/dwc/pcie-sprd.c+306 -02 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/2] PCI: Add new Unisoc PCIe driver

From: Hongtao Wu <[email protected]>

This series adds PCIe controller driver for Unisoc SoCs. This controller is based on DesignWare PCIe IP.

Changes from v1:
1) Test this patch on top of Rob Herring's 40 part series of DWC clean-ups:
https://lore.kernel.org/linux-pci/[email protected]/

2) Delete empty function

3) Document property "sprd,pcie-poweron-syscons" and 'sprd,pcie-poweroff-syscons'

4) Delete runtime suspend/resume function

5) Add COMPILE_TEST which CONFIG_PCIE_SPRD depends on

Changes from v2:
1) Change RC mode to host mode in drivers/pci/controller/dwc/Kconfig

2) Change Signed-off-by from Billows Wu to Hongtao Wu

Changes from v3:
1) Split the property 'sprd,pcie-poweron-syscons' and 'sprd,pcie-poweroff-syscons' into reset, power domains, phy and so on.

2) Delete the function to get resource 'msi' and 'dbi' which were parsed by the DW core.

3) Delete the function 'sprd_pcie_host_init', because the DW core has done it.

Changes from v4:
1) Install 'yamllint' and upgrade dt-schema in order to solve the yamllint and dtschema/dtc warnings/errors:

Changes from v5:
1) Change "GPL v2" to "GPL".
2) Remove exit_p wrapper which used to define remove callback.

Hongtao Wu (2):
dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller
PCI: sprd: Add support for Unisoc SoCs' PCIe controller

 .../devicetree/bindings/pci/sprd-pcie.yaml         |  93 +++++++
 drivers/pci/controller/dwc/Kconfig                 |  12 +
 drivers/pci/controller/dwc/Makefile                |   1 +
 drivers/pci/controller/dwc/pcie-sprd.c             | 293 +++++++++++++++++++++
 4 files changed, 399 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/sprd-pcie.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-sprd.c

--
2.7.4