Skip to content

Add QPIC NAND support for IPQ6018

Kathiravan T linux-arm-msm linux-devicetree lkml 3 versions – Applied

Status from this message: This patch was applied to qcom/linux.git (refs/heads/for-next):

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest1 patch 0 repliesApplied 1/1
  2. v21 patch 0 repliesSuperseded
  3. v13 patches 3 repliesApplied

Changes in v3 from the cover letter

- Rebased on v5.10-rc6
- Renamed the qpic bam dma node name from 'dma' to 'dma-controller'
- Update the device register space to 64bit format

Patches in v3 All 1 applied

#Subject and filesSizeRepliesApplied
1/1arm64: dts: ipq6018: Add the QPIC peripheral nodesarch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts arch/arm64/boot/dts/qcom/ipq6018.dtsi+57 -00 repliesApplied

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH V3 0/1] Add QPIC NAND support for IPQ6018

IPQ6018 has the QPIC NAND controller of version 1.5.0, which uses the BAM DMA. Add support for the QPIC BAM, QPIC NAND and enable the same in the board DTS file.

[V3]:
- Rebased on v5.10-rc6
- Renamed the qpic bam dma node name from 'dma' to 'dma-controller'
- Update the device register space to 64bit format

Above mentioned last two points based on the latest changes in the QCOM tree.

[V2]:
- Rebased on v5.10-rc2
- Replaced "ok" with "okay" for status property
- Dropped the MTD and dt-bindings patch as they are already picked in MTD tree

Kathiravan T (1):
arm64: dts: ipq6018: Add the QPIC peripheral nodes

 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 16 ++++++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi        | 41 ++++++++++++++++++++
 2 files changed, 57 insertions(+)

base-commit: b65054597872ce3aefbc6a666385eabdf9e288da

Signature · 1 line
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation