Skip to content

Check for device supported event rings and channels

Hemant Kumar linux-arm-msm lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2bus: mhi: core: Count number of HW channels supported by controllerdrivers/bus/mhi/core/init.c drivers/bus/mhi/core/internal.h include/linux/mhi.h+4 -01 reply
2/2bus: mhi: core: Check for device supported event rings and channelsdrivers/bus/mhi/core/init.c drivers/bus/mhi/core/internal.h+35 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchManivannan Sadhasivam
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/2] Check for device supported event rings and channels

This change is introduced to make sure device supported hardware event ring, hardware channels, total number of event rings and total number of channels match with MHI host controller. In case of a mismatch, driver bails out and does not move MHI device to M0 from Ready state.

Hemant Kumar (2):
bus: mhi: core: Count number of HW channels supported by controller
bus: mhi: core: Check for device supported event rings and channels

 drivers/bus/mhi/core/init.c     | 33 +++++++++++++++++++++++++++++++++
 drivers/bus/mhi/core/internal.h |  5 +++++
 include/linux/mhi.h             |  1 +
 3 files changed, 39 insertions(+)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project