Skip to content

remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018

Gokul Sriram Palanisamy linux-arm-msm linux-clk linux-devicetree linux-remoteproc lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt+4 -01 reply
2/3remoteproc: qcom: wcss: populate driver data for IPQ6018drivers/remoteproc/qcom_q6v5_wcss.c+17 -21 reply
3/3arm64: dts: ipq6018: Update WCSS PIL driver compatiblearch/arm64/boot/dts/qcom/ipq6018.dtsi+1 -10 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/3A-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] remoteproc: qcom: q6v5-wcss: Add driver data for IPQ6018

Q6 based WiFi fw loading is supported across different targets, ex: IPQ8074/QCS404. In order to support different fw name for IPQ6018, populate hardcoded param using compatible and driver data.

This series depends on
[PATCH v8] remoteproc: qcom: q6v5-wcss: Add support for secure pil

Gokul Sriram Palanisamy (3):
dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for IPQ6018
remoteproc: qcom: wcss: populate driver data for IPQ6018
arm64: dts: ipq6018: Update WCSS PIL driver compatible

 .../devicetree/bindings/remoteproc/qcom,q6v5.txt      |  4 ++++
 arch/arm64/boot/dts/qcom/ipq6018.dtsi                 |  2 +-
 drivers/remoteproc/qcom_q6v5_wcss.c                   | 19 +++++++++++++++++--
 3 files changed, 22 insertions(+), 3 deletions(-)
Signature · 1 line
2.7.4