Skip to content

arm64: synquacer: DeveloperBox updates

Masami Hiramatsu u-boot 3 versions – In review

Get series with b4
b4 am 162608613498.206671.7144957749931134518.stgit@localhost

Versions newest first · linked by author and title

  1. v3 Latest8 patches 8 repliesIn review
  2. v26 patches 2 repliesSuperseded
  3. v16 patches 5 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8board: synquacer: Initialize SCBM SMMU at board_init()board/socionext/developerbox/developerbox.c drivers/net/sni_netsec.c+15 -71 reply
2/8configs: synquacer: Make U-Boot binary position independentconfigs/synquacer_developerbox_defconfig+2 -11 reply
3/8dts: synquacer: Add partition information to the spi-norarch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi+49 -01 reply
4/8configs: synquacer: Remove mtdparts settings and update DFU settingconfigs/synquacer_developerbox_defconfig include/configs/synquacer.h+1 -31 reply
5/8configs: synquacer: Drop Ext2/4 support by defaultconfigs/synquacer_developerbox_defconfig+0 -21 reply
6/8configs: synquacer: Enable UEFI secure bootconfigs/synquacer_developerbox_defconfig+1 -01 reply
7/8configs: synquacer: Use RAW capsule image instead of FITconfigs/synquacer_developerbox_defconfig+1 -11 reply
8/8configs: synquacer: Ignore OsIndications on DeveloperBoxconfigs/synquacer_developerbox_defconfig+1 -01 reply

Reviews trailers per patch

1 of 8 patches has a Reviewed-by or Acked-by.

PatchMarek Behún
1/8
2/8
3/8R-b
4/8
5/8
6/8
7/8
8/8

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/8] arm64: synquacer: DeveloperBox updates

Hi,

Here is the 3rd version of the series to update the DeveloperBox support. I found that the latest master branch update defconfigs with savedefconfig by;

commit 2bba78076b03 ("configs: Resync with savedefconfig")

So I decided to update the patches for the defconfig so that those can be applied cleanly and use defconfig to sync it up.

And in this version, I also add 2 patches to support capsule update correctly.

[1/8] board: synquacer: Initialize SCBM SMMU at board_init()
- This is a driver cleanup, split the SMMU setup from the driver.

[2/8] configs: synquacer: Make U-Boot binary position independent
- This makes U-Boot position independent for usability.

[3/8] dts: synquacer: Add partition information to the spi-nor [4/8] configs: synquacer: Remove mtdparts settings and update DFU setting
- These are the fixes according to the MTD subsystem update. (Thanks Marek!)

[5/8] configs: synquacer: Drop Ext2/4 support by default [6/8] configs: synquacer: Enable UEFI secure boot
- These are making U-Boot more likely to EDK2 behaviors.

[7/8] configs: synquacer: Use RAW capsule image instead of FIT [8/8] configs: synquacer: Ignore OsIndications on DeveloperBox
- These are for supporting capsule update on DeveloperBox.

Thank you,

---

Masami Hiramatsu (8):
board: synquacer: Initialize SCBM SMMU at board_init()
configs: synquacer: Make U-Boot binary position independent
dts: synquacer: Add partition information to the spi-nor
configs: synquacer: Remove mtdparts settings and update DFU setting
configs: synquacer: Drop Ext2/4 support by default
configs: synquacer: Enable UEFI secure boot
configs: synquacer: Use RAW capsule image instead of FIT
configs: synquacer: Ignore OsIndications on DeveloperBox

 .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   49 ++++++++++++++++++++
 board/socionext/developerbox/developerbox.c        |   15 ++++++
 configs/synquacer_developerbox_defconfig           |   11 ++--
 drivers/net/sni_netsec.c                           |    7 ---
 include/configs/synquacer.h                        |    2 -
 5 files changed, 70 insertions(+), 14 deletions(-)

--
Masami Hiramatsu <[email protected]>