Skip to content

USB DWC3 QCOM Multi power domain support

Sandeep Maheswaram linux-arm-msm linux-devicetree linux-usb lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: usb: qcom,dwc3: Add multi-pd bindings for dwc3 qcomDocumentation/devicetree/bindings/usb/qcom,dwc3.yaml+12 -15 replies
2/3usb: dwc3: qcom: Add multi-pd supportdrivers/usb/dwc3/dwc3-qcom.c+49 -01 reply
3/3arm64: dts: qcom: sc7280: Add cx power domain supportarch/arm64/boot/dts/qcom/sc7280.dtsi+4 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] USB DWC3 QCOM Multi power domain support

Add multi pd support to set performance state for cx domain to maintain minimum corner voltage for USB clocks.

Add corresponding dt bindings, driver changes and dt changes.

Sandeep Maheswaram (3):
dt-bindings: usb: qcom,dwc3: Add multi-pd bindings for dwc3 qcom
usb: dwc3: qcom: Add multi-pd support
arm64: dts: qcom: sc7280: Add cx power domain support

 .../devicetree/bindings/usb/qcom,dwc3.yaml         | 13 +++++-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  5 ++-
 drivers/usb/dwc3/dwc3-qcom.c                       | 49 ++++++++++++++++++++++
 3 files changed, 65 insertions(+), 2 deletions(-)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation