Skip to content

Fixes for CN10K and CN9xxx platforms

Subbaraya Sundeep netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest9 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9octeontx2-af: Do not fixup all VF action entriesdrivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c+31 -110 replies
2/9octeontx2-af: Fix LBK backpressure id countdrivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c+3 -30 replies
3/9octeontx2-af: Retry until RVU block reset completedrivers/net/ethernet/marvell/octeontx2/af/rvu.c+5 -20 replies
4/9octeontx2-af: cn10k: Use appropriate register for LMAC enabledrivers/net/ethernet/marvell/octeontx2/af/cgx.c drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h drivers/net/ethernet/marvell/octeontx2/af/rpm.c +4 more+66 -70 replies
5/9octeontx2-pf: cn10k: Ensure valid pointers are freed to auradrivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h+3 -00 replies
6/9octeontx2-af: Increase link credit restore polling timeoutdrivers/net/ethernet/marvell/octeontx2/af/mbox.h drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c+3 -20 replies
7/9octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfacesdrivers/net/ethernet/marvell/octeontx2/af/rpm.c+12 -150 replies
8/9octeontx2-pf: Forward error codes to VFdrivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c+6 -10 replies
9/9octeontx2-af: Add KPU changes to parse NGIO as separate layerdrivers/net/ethernet/marvell/octeontx2/af/npc_profile.h+35 -350 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [net PATCH 0/9] Fixes for CN10K and CN9xxx platforms

Hi,

This patchset has consolidated fixes in Octeontx2 driver handling CN10K and CN9xxx platforms. When testing the new CN10K hardware some issues resurfaced like accessing wrong register for CN10K and enabling loopback on not supported interfaces. Some fixes are needed for CN9xxx platforms as well.

Below is the description of patches

Patch 1: AF sets RX RSS action for all the VFs when a VF is brought up. But when a PF sets RX action for its VF like Drop/Direct to a queue in ntuple filter it is not retained because of AF fixup. This patch skips modifying VF RX RSS action if PF has already set its action.

Patch 2: When configuring backpressure wrong register is being read for LBKs hence fixed it.

Patch 3: Some RVU blocks may take longer time to reset but are guaranteed to complete the reset. Hence wait till reset is complete.

Patch 4: For enabling LMAC CN10K needs another register compared to CN9xxx platforms. Hence changed it.

Patch 5: Adds missing barrier before submitting memory pointer to the aura hardware.

Patch 6: Increase polling time while link credit restore and also return proper error code when timeout occurs.

Patch 7: Internal loopback not supported on LPCS interfaces like SGMII/QSGMII so do not enable it.

Patch 8: When there is a error in message processing, AF sets the error response and replies back to requestor. PF forwards a invalid message to VF back if AF reply has error in it. This way VF lacks the actual error set by AF for its message. This is changed such that PF simply forwards the actual reply and let VF handle the error.

Patch 9: ntuple filter with "flow-type ether proto 0x8842 vlan 0x92e" was not working since ethertype 0x8842 is NGIO protocol. Hardware parser explicitly parses such NGIO packets and sets the packet as NGIO and do not set it as tagged packet. Fix this by changing parser such that it sets the packet as both NGIO and tagged by using separate layer types.

Thanks,
Sundeep

Geetha sowjanya (5):
octeontx2-af: Retry until RVU block reset complete
octeontx2-af: cn10k: Use appropriate register for LMAC enable
octeontx2-pf: cn10k: Ensure valid pointers are freed to aura
octeontx2-af: Increase link credit restore polling timeout
octeontx2-af: cn10k: Do not enable RPM loopback for LPC interfaces

Kiran Kumar K (1):
octeontx2-af: Add KPU changes to parse NGIO as separate layer

Subbaraya Sundeep (2):
octeontx2-af: Do not fixup all VF action entries
octeontx2-pf: Forward error codes to VF

Sunil Goutham (1):
octeontx2-af: Fix LBK backpressure id count

 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    |  2 +
 .../ethernet/marvell/octeontx2/af/lmac_common.h    |  3 +
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  1 +
 .../ethernet/marvell/octeontx2/af/npc_profile.h    | 70 +++++++++++-----------
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c    | 66 +++++++++++++++-----
 drivers/net/ethernet/marvell/octeontx2/af/rpm.h    |  4 ++
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    |  7 ++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  1 +
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    | 14 ++++-
 .../ethernet/marvell/octeontx2/af/rvu_debugfs.c    |  2 +
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    | 20 +++----
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    | 22 ++++++-
 .../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 20 ++++---
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  1 +
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |  7 ++-
 15 files changed, 164 insertions(+), 76 deletions(-)
Signature · 1 line
2.7.4