Skip to content

ahci: Add some controls on actual LPM capability

Runa Guo-oc linux-ide lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 10 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2ahci: Add PhyRdy Change control on actual LPM capabilitydrivers/ata/ahci.c drivers/ata/libata-eh.c include/linux/libata.h+17 -08 replies
2/2ahci: Add PxSCTL.IPM control on actual LPM capabilitydrivers/ata/libata-sata.c+11 -12 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] ahci: Add some controls on actual LPM capability

On some platform, when OS enables LPM by default (eg, min_power), then, PhyRdy Change cannot be detected if ahci supports no LPM; DIPM Slumber request cannot be disallowed if ahci's CAP.PSC is set to '1' and CAP.SSC is cleared to '0', which may cause ahci to be an uncertain state (same for Partial).

In ahci spec, PhyRdy Change cannot coexist with LPM; when CAP.PSC/SSC is cleared to '0', the PxSCTL.IPM field must be programmed to disallow device initiated Partial/Slumber request.

Adds suports to control these cases on actual LPM capability.

Runa Guo-oc (2):
ahci: Add PhyRdy Change control on actual LPM capability
ahci: Add PxSCTL.IPM control on actual LPM capability

 drivers/ata/ahci.c        |  9 +++++++++
 drivers/ata/libata-eh.c   |  4 ++++
 drivers/ata/libata-sata.c | 12 +++++++++++-
 include/linux/libata.h    |  4 ++++
 4 files changed, 28 insertions(+), 1 deletion(-)
Signature · 1 line
2.7.4