Skip to content

net: phy: adin: enable configuration of the LP Termination Register

Osose Itua linux-devicetree lkml netdev 3 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 2 repliesApplied 2/2
  2. v22 patches 7 repliesSuperseded
  3. v11 of 2 patches 2 repliesSuperseded

Changes in v3 from the cover letter

- put bindings patch first in the patchset
- update commit message of the bindings patch and improve the bindings description to better explain why the added property is needed (as suggested by Nuno Sá and Andrew Lunn)
- rework bit clearing to use phy_clear_bits_mmd() instead of phy_write_mmd() since only a single bit needs to be cleared (as noted by Subbaraya Sundeep)
- remove redundant phy_read_mmd() and error checking (as suggested by Nuno Sá)
- remove unnecessary C++ <cerrno> include that was causing build issues

Patches in v3 All 2 applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: net: adi,adin: document LP Termination propertyDocumentation/devicetree/bindings/net/adi,adin.yaml+14 -01 replyApplied
2/2net: phy: adin: enable configuration of the LP Termination Registerdrivers/net/phy/adin.c+20 -00 repliesApplied

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchNuno SáRob Herring (Arm)
SeriesA-b
1/2A-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/2] net: phy: adin: enable configuration of the LP Termination Register

Changes in v3:
- put bindings patch first in the patchset
- update commit message of the bindings patch and improve the bindings description to better explain why the added property is needed (as suggested by Nuno Sá and Andrew Lunn)
- rework bit clearing to use phy_clear_bits_mmd() instead of phy_write_mmd() since only a single bit needs to be cleared (as noted by Subbaraya Sundeep)
- remove redundant phy_read_mmd() and error checking (as suggested by Nuno Sá)
- remove unnecessary C++ <cerrno> include that was causing build issues

Changes in v2:
- rework phy_read_mmd() error handling

Osose Itua (2):
dt-bindings: net: adi,adin: document LP Termination property
net: phy: adin: enable configuration of the LP Termination Register

 .../devicetree/bindings/net/adi,adin.yaml     | 14 +++++++++++++
 drivers/net/phy/adin.c                        | 20 +++++++++++++++++++
 2 files changed, 34 insertions(+)