Skip to content

sunxi: OrangePi Zero 2: Ethernet support

Jernej Škrabec u-boot 1 version New

Get series with b4
b4 am 1886239.ufdBqgdUVp@kista

Versions newest first

  1. v2 Latest0 of 3 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchJernej Skrabec
SeriesT-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/3] sunxi: OrangePi Zero 2: Ethernet support

Dne sreda, 27. januar 2021 ob 02:06:35 CET je Andre Przywara napisal(a):

Quoted 11 lines

The first two patches prepare the sun8i-emac driver to deal with the EMAC as integrated into the H616 SoC. This IP block is compatible with the A64 version, but the current driver prevents us from using that:
- The EPHY syscon register needs to have a bit cleared to select the external PHY. On the A64 it is cleared on reset, but we should not rely on that. The Linux driver does so as well. Fixed in patch 1/3.
- The pinmux setting is tied to the compatible string, but the H616 requires a different value. Fixed in patch 2/3.

The final patch enables Ethernet support for the OrangePi Zero 2 board, which now works without further ado.

This is cleaner and works for me, so for the whole series:

Thanks!

Best regards,
Jernej

Quoted 17 lines

Cheers,
Andre

Andre Przywara (3):
net: sun8i-emac: Always clear syscon EPHY register
net: sun8i-emac: Determine pinmux based on SoC, not EMAC type
sunxi: OrangePi Zero 2: Enable Ethernet

 configs/orangepi_zero2_defconfig |  2 ++
 drivers/net/sun8i_emac.c         | 59 ++++++++++++++++++--------------
 2 files changed, 35 insertions(+), 26 deletions(-)
Signature · 1 line
2.17.5