W1: sysfs, lifetime and other fixes

Hi,

I happened to take a look into drivers/w1 and found there bunch of thigs that IMO should be changed:

- custom-made refcounting is racy
- lifetime rules need to be better enforced
- family framework is insufficient for many advanced w1 devices
- custom-made hotplug notification over netlink should be removed in favor of standard hotplug notification
- sysfs attributes have unnecessary prefixes (like w1_master) or not needed at all (w1_master_pointer)

Please consider series of patches below. Unfortunately I do not have any W1 equipment so it was only compile-tested. Please also note that lifetime and locking rules were changed on object-by-object base so mid-series some stuff may appear broken but as far as I can see the end result shoudl work pretty well.

w1-whitespace.patch
Whitespace fixes.

w1-formatting.patch
Some formatting changes to bring the code in line with CodingStyle guidelines.

w1-master-attr-group.patch
Use attribute_group to create master device attributes to guarantee proper cleanup in case of failure. Also, hide most of attribute define ugliness in macros.

w1-slave-attr-group.patc
Add 2 default attributes "family" and "serial" to slave devices, every 1-Wire slave has them. Use attribute_group to handle. The rest of slave attributes are left as is - will be dealt with later.

w1-lists-cleanup.patch
List handling cleanup. Most of the list_for_each_safe users don't need *_safe variant, *_entry variant is better suited in most places. Also, checking retrieved list element for null is a bit pointless...

w1-drop-owner.patch
Drop owner field from w1_master and w1_slave structures. Just having it there does not magically fixes lifetime rules.

w1-bus-ops.patch
Cleanup bus operations code:
- have bus operatiions accept w1_master instead of unsigned long and drop data field from w1_bus_master so the structure can be statically allocated by driver implementing it;
- rename w1_bus_master to w1_bus_ops to avoid confusion with w1_master;
- separate master registering and allocation so drivers can setup proper link between private data and master and set useable master's name.

w1-fold-w1-int.patch
Fold w1_int.c into w1.c - there is no point in artificially separating code for master devices between 2 files.

w1-drop-netlink.patch
Drop custom-made hotplug over netlink notification from w1 core. Standard hotplug mechanism should work just fine (patch will follow).

w1-drop-control-thread.patch
Drop control thread from w1 core, whatever it does can also be done in the context of w1_remove_master_device. Also, pin the module when registering new master device to make sure that w1 core is not unloaded until last device is gone. This simplifies logic a lot.

w1-move-search-to-io.patch
Move w1_search function to w1_io.c to be with the rest of IO code.

w1-master-drop-attrs.patch
Get rid of unneeded master device attributes:
- 'pointer' and 'attempts' are meaningless for userspace;
- information provided by 'slaves' and 'slave_count' can be gathered

     from other sysfs bits;

- w1_slave_found has to be rearranged now that slave_count field is gone.

w1-master-attr-cleanup.patch
Clean-up master attribute implementation:
- drop unnecessary "w1_master" prefix from attribute names;
- do not acquire master->mutex when accessing attributes;
- move attribute code "closer" to the rest of master code.

w1-master-scan-interval.patch
More master attributes changes:
- rename timeout parameter/attribute to scan_interval to better

     reflect its purpose;
   - make scan_timeout be a per-device attribute and allow changing
     it from userspace via sysfs;

- allow changing max_slave_count it from userspace as well.

w1-master-add-ttl-attr.patch
Add slave_ttl attribute to w1 masters.

w1-master-cleanup.patch
Clean-up master device implementation:
- get rid of separate refcount, rely on driver model to enforce

     lifetime rules;

- use atomic to generate unique master IDs;
- drop unused fields.

w1-slave-cleanup.patch
Clean-up slave device implementation:
- get rid of separate refcount, rely on driver model to enforce

     lifetime rules;

- pin w1 module until slave device is registered with sysfs to make sure W1 core stays loaded.
- drop 'name' attribute as we already have it in bus_id.

w1-family-cleanup.patch
Clean-up family implementation:
- get rid of w1_family_ops and template attributes in w1_slave structure and have family drivers create necessary attributes themselves. There are too many different devices using 1-Wire interface and it is impossible to fit them all into single attribute model. If interface unification is needed it can be done by building cross-bus class hierarchy.
- rename w1_smem to w1_sernum because devices are called Silicon serial numbers, they have address (ID) but don't have memory in regular sense.
- rename w1_therm to w1_thermal.

w1-family-is-driver.patch
Convert family into proper device-model drivers:
- embed driver structure into w1_family and register with the

     driver core;
   - do not try to manually bind slaves to familes, leave it to
     the driver core;

- fold w1_family.c into w1.c

w1-device-id.patch
Support for automatic family drivers loading via hotplug:
- allow family drivers support list of families;
- export supported families through MODULE_DEVICE_TABLE.

w1-hotplug.patch
Implement W1 bus hotplug handler. Slave devices will define FID=%02x (family ID) end SN=%024llX environment variables.

w1-module-attrs.patch
Allow changing w1 module parameters through sysfs, add parameter descriptions and document them in Documentation/kernel-parameters.txt

Thanks!

Dmitry