Skip to content

Add mpc8560 support to powerpc

Vitaly Bordug linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 8 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6PAL: Support of the fixed PHYdrivers/net/phy/Kconfig drivers/net/phy/phy_device.c include/linux/phy.h+48 -210 replies
2/6FS_ENET: Utilize Phy abstractiondrivers/net/fs_enet/Makefile drivers/net/fs_enet/fec.h drivers/net/fs_enet/fs_enet-main.c +8 more+713 -10540 replies
3/6FS_ENET: use PAL for mii management (BSP part)arch/ppc/platforms/85xx/mpc8560_ads.c arch/ppc/platforms/85xx/mpc85xx_ads_common.h arch/ppc/platforms/mpc8272ads_setup.c +12 more+585 -3980 replies
4/6FS_ENET: phydev pointer may be dereferenced without NULL checkdrivers/net/fs_enet/fs_enet-main.c+4 -00 replies
5/6CPM_UART: unify clock sourcesdrivers/serial/cpm_uart/cpm_uart_core.c drivers/serial/cpm_uart/cpm_uart_cpm2.c include/asm-powerpc/fs_pd.h +1 more+45 -135 replies
6/6POWERPC: Add mpc8560 board supportarch/powerpc/lib/Makefile arch/powerpc/platforms/85xx/Kconfig arch/powerpc/platforms/85xx/Makefile +8 more+860 -33 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] Add mpc8560 support to powerpc

This is a first preliminary series to move 8560ads to powerpc and hence finish 85xx family in terms of merge. Subsequient fs_enet patches are strictly required for the following to work, but submitted here as reference only (will be updated and sent to netdev shortly).

ATM not all points are adressed, there still may be bugs, but in general it works and have most of the SoC stuff (UARTs, Gig eth, 100BaseT FCC) as well as the PCI stuff.

All the comments are greatly appreciated.

--
Sincerely, Vitaly