Skip to content

atl1: Revised Attansic L1 ethernet driver

Jay Cliburn lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 36 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4atl1: Build files for Attansic L1 driverdrivers/net/Kconfig drivers/net/Makefile drivers/net/atl1/Makefile+43 -05 replies
2/4atl1: Header files for Attansic L1 driverdrivers/net/atl1/atl1.h drivers/net/atl1/atl1_hw.h drivers/net/atl1/atl1_osdep.h+1320 -04 replies
3/4atl1: Main C file for Attansic L1 driverdrivers/net/atl1/atl1_main.c+2551 -012 replies
4/4atl1: Ancillary C files for Attansic L1 driverdrivers/net/atl1/atl1_ethtool.c drivers/net/atl1/atl1_hw.c drivers/net/atl1/atl1_param.c+1573 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] atl1: Revised Attansic L1 ethernet driver

Based upon feedback from Stephen Hemminger and Francois Romieu, please consider this resubmitted patchset that provides support for the Attansic L1 gigabit ethernet adapter. This patchset is built against 2.6.19-rc6. The original patchset was submitted 20060927.

The monolithic version of this patchset may be found at:
ftp://hogchain.net/pub/linux/m2v/attansic/kernel_driver/atl1-2.0.2/atl1-2.0.2-kernel2.6.19.rc6.patch.bz2

As a reminder, this driver a modified version of the Attansic reference driver for the L1 ethernet adapter. Attansic has granted permission for its inclusion in the mainline kernel.

The patch contains:

 Kconfig             |   12 
 Makefile            |    1 
 atl1/Makefile       |   30 
 atl1/atl1.h         |  251 +++++
 atl1/atl1_ethtool.c |  530 ++++++++++
 atl1/atl1_hw.c      |  840 +++++++++++++++++
 atl1/atl1_hw.h      |  991 ++++++++++++++++++++
 atl1/atl1_main.c    | 2551 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 atl1/atl1_osdep.h   |   78 +
 atl1/atl1_param.c   |  203 ++++
 10 files changed, 5487 insertions(+)