Skip to content

Preliminary Ebony (440GP) support for arch/powerpc

David Gibson linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest16 patches 94 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/16Remove ibm4{xx,4x}.h from arch/powerpcarch/powerpc/kernel/head_44x.S+0 -21 reply
2/16More DCR native fixupsinclude/asm-powerpc/dcr-native.h+2 -21 reply
3/16Use udbg_early_init() on ppc32arch/powerpc/kernel/btext.c arch/powerpc/kernel/setup_32.c arch/powerpc/kernel/udbg.c +1 more+14 -61 reply
4/16powerpc: Allow duplicate lmb_reserve() callsarch/powerpc/kernel/prom.c arch/powerpc/mm/lmb.c+4 -33 replies
5/16powerpc: Add zImage platform hook for kernel addressarch/powerpc/boot/main.c arch/powerpc/boot/ops.h+16 -40 replies
6/16Port 44x MMU definitions to ARCH=powerpcarch/powerpc/kernel/head_44x.S arch/powerpc/mm/44x_mmu.c arch/powerpc/mm/mmu_decl.h +2 more+98 -674 replies
7/16Early serial debug support for PPC44xarch/powerpc/Kconfig.debug arch/powerpc/kernel/Makefile arch/powerpc/kernel/head_44x.S +5 more+107 -269 replies
8/16Define FIXED_PORT flag for serial_corearch/powerpc/kernel/legacy_serial.c drivers/serial/serial_core.c include/linux/serial_core.h+16 -100 replies
9/16Use resource_size_t for serial port IO addressesdrivers/serial/8250.c drivers/serial/8250_early.c drivers/serial/serial_core.c +2 more+19 -150 replies
10/16Add support for BSS stack for zImage wrapperarch/powerpc/boot/Makefile arch/powerpc/boot/bss_stack.S arch/powerpc/boot/crt0.S +1 more+30 -30 replies
11/16zImage wrapper for Ebonyarch/powerpc/boot/Makefile arch/powerpc/boot/ebony.c arch/powerpc/boot/mktree.c +1 more+112 -72 replies
12/16Automatically lmb_reserve() initrdarch/powerpc/kernel/prom.c arch/powerpc/kernel/setup-common.c+25 -201 reply
13/16Add initrd properties to device tree from zImagearch/powerpc/boot/main.c+13 -00 replies
14/16Add arch/powerpc driver for UIC, PPC4xx interrupt controllerarch/powerpc/sysdev/Makefile arch/powerpc/sysdev/uic.c include/asm-powerpc/uic.h+367 -00 replies
15/16Add device tree for Ebonyarch/powerpc/boot/dts/ebony.dts+222 -062 replies
16/16Support for Ebony in arch/powerpcarch/powerpc/platforms/4xx/Kconfig arch/powerpc/platforms/4xx/Makefile arch/powerpc/platforms/4xx/ebony.c+71 -22 replies

Reviews trailers per patch

2 of 16 patches have a Reviewed-by or Acked-by.

PatchBenjamin Herrenschmidt
1/16
2/16A-b
3/16A-b
4/16
5/16
6/16
7/16
8/16
9/16
10/16
11/16
12/16
13/16
14/16
15/16
16/16

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [0/16] Preliminary Ebony (440GP) support for arch/powerpc

Here is a preliminary set of patches implementing support for the 440GP based Ebony evaluation board in arch/powerpc. A number of the earlier patches are in Paul's queue already, so may appear in powerpc.git at any point. Most of the later ones need at least some cleanup or reworking before they'll be ready for merging.

With these patches I can boot to a shell prompt on initrd on my Ebony board. There are still a bunch of problems: clock timings are way out (runs about 4* fast), things freeze up when I attempt to use an nfsroot, many devices aren't supported. A lot of things are hardcoded in the device tree, so you may well have to tweak it if your Ebony is different from mine.

Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson