Skip to content

limit recovery retries

Bernd Schubert linux-scsi 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 1 patch 1 replyIn review

Patches in v1 No applies recorded yet

The patch the cover letter announces is not in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] limit recovery retries

Hi,

the next mail has a patch to offline a device when eh is activated again and again.

Presently I have a system stopping to boot because one of the scsi-devices is in something like a zombie state.
Without the patch, the eh is called in an endless loop, with the patch, it now deactivates the device, but still doesn't proceed to boot. Probably since the last scsi command never returns?

[  216.469912] Sending BRST chan: 0
[  216.473241] sd 4:0:2:0: trying bus reset
[  216.477283] mptscsih: ioc2: attempting bus reset! (sc=ffff810127db1500)
[  216.484041] sd 4:0:2:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  216.865628] mptscsih: ioc2: bus reset: SUCCESS (sc=ffff810127db1500)
[  256.835540] sd 4:0:2:0: Activating scsi error recovery
[  256.840812] Starting device recovery 2
[  256.844676] sd 4:0:2:0: trying to abort command
[  256.849337] mptscsih: ioc2: attempting task abort! (sc=ffff810127db1500)
[  256.856195] sd 4:0:2:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  259.029233] mptbase: Initiating ioc2 recovery
[  272.175398] mptscsih: ioc2: Issue of TaskMgmt failed!
[  272.180587] mptscsih: ioc2: task abort: FAILED (sc=ffff810127db1500)
[  272.187093] sd 4:0:2:0: Sending BDR 0xffff810129d9b960
[  272.192351] sd 4:0:2:0: trying device reset
[  272.196757] mptscsih: ioc2: attempting target reset! (sc=ffff810127db1500)
[  272.203790] sd 4:0:2:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  274.377074] mptbase: Initiating ioc2 recovery
[  287.523243] mptscsih: ioc2: Issue of TaskMgmt failed!
[  287.528430] mptscsih: ioc2: target reset: FAILED (sc=ffff810127db1500)
[  287.535103] Sending BRST chan: 0
[  287.538438] sd 4:0:2:0: trying bus reset
[  287.542473] mptscsih: ioc2: attempting bus reset! (sc=ffff810127db1500)
[  287.549239] sd 4:0:2:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[  287.930806] mptscsih: ioc2: bus reset: SUCCESS (sc=ffff810127db1500)
                                                                         [ OK ]
 * Setting the system clock
 * Loading kernel modules...                                                    [  291.296696] ACPI: Processor [CPU0] (supports 8 throttling states)
[  291.303304] ACPI: Processor [CPU1] (supports 8 throttling states)
[  291.309852] ACPI: Processor [CPU2] (supports 8 throttling states)
[  291.316407] ACPI: Processor [CPU3] (supports 8 throttling states)
[  291.322969] ACPI: Processor [CPU4] (supports 8 throttling states)
[  291.329522] ACPI: Processor [CPU5] (supports 8 throttling states)
[  291.336086] ACPI: Processor [CPU6] (supports 8 throttling states)
[  291.342644] ACPI: Processor [CPU7] (supports 8 throttling states)
[  327.896734] sd 4:0:2:0: Activating scsi error recovery
[  327.902005] Too many errors for this scsi host, deactivating its devices
[  327.908859] sd 4:0:2:0: scsi: Device offlined - not ready after error recovery
[generate break]
[ 2349.520917] SysRq : Show Blocked State
[ 2349.524763]
[ 2349.524764]                                  free                        sibling
[ 2349.533816]   task                 PC        stack   pid father child younger older
[ 2349.541612] modprobe      D 0000001bdcb18803     0  2331      1 (NOTLB)
[ 2349.548396]  ffff810127015218 0000000000000086 0000000000000000 ffff810128c70000
[ 2349.555997]  0000000000000000 ffff81012b5f8810 ffff810127d04100 00000005880e7bf8
[ 2349.563606]  00000000fffeff19 0000000000000000 ffff810001053400 0000000500000000
[ 2349.570994] Call Trace:
[ 2349.573720]  [<ffffffff804f070b>] io_schedule+0x28/0x36
[ 2349.579040]  [<ffffffff80263565>] sync_page+0x4c/0x58
[ 2349.584181]  [<ffffffff804f09f5>] __wait_on_bit_lock+0x3c/0x6b
[ 2349.590112]  [<ffffffff80263e9d>] __lock_page+0xa7/0xad
[ 2349.595427]  [<ffffffff8026522d>] read_cache_page_async+0x114/0x17c
[ 2349.601792]  [<ffffffff8026529b>] read_cache_page+0x6/0x3e
[ 2349.607358]  [<ffffffff802d3d33>] read_dev_sector+0x2d/0x86
[ 2349.613020]  [<ffffffff802d4688>] read_lba+0x76/0xd1
[ 2349.618074]  [<ffffffff802d477f>] is_gpt_valid+0x9c/0x244
[ 2349.623572]  [<ffffffff802d4a69>] efi_partition+0x142/0x709
[ 2349.629252]  [<ffffffff802d3bdc>] rescan_partitions+0x161/0x28b
[ 2349.635279]  [<ffffffff802b49c6>] do_open+0x10e/0x2e1
[ 2349.640420]  [<ffffffff802b4c35>] __blkdev_get+0x9c/0xd4
[ 2349.645823]  [<ffffffff802b4c7b>] blkdev_get+0xe/0x13
[ 2349.650955]  [<ffffffff802d39ff>] register_disk+0x1cb/0x247
[ 2349.656628]  [<ffffffff80371de8>] add_disk+0x37/0x41
[ 2349.661684]  [<ffffffff8043e4dd>] sd_probe+0x35c/0x442
[ 2349.666905]  [<ffffffff803dab38>] driver_probe_device+0xfa/0x18d
[ 2349.673010]  [<ffffffff803dabd4>] __device_attach+0x9/0xe
[ 2349.678505]  [<ffffffff803d9d03>] bus_for_each_drv+0x46/0x82
[ 2349.684271]  [<ffffffff803dac4f>] device_attach+0x76/0x9a
[ 2349.689751]  [<ffffffff803da083>] bus_attach_device+0x3c/0xa1
[ 2349.695588]  [<ffffffff803d8183>] device_add+0x408/0x643
[ 2349.700990]  [<ffffffff80435660>] scsi_sysfs_add_sdev+0x40/0x2bf
[ 2349.707095]  [<ffffffff8043354a>] scsi_probe_and_add_lun+0x946/0xa96
[ 2349.713553]  [<ffffffff80433996>] __scsi_scan_target+0xcc/0x746
[ 2349.719578]  [<ffffffff80434133>] scsi_scan_channel+0x67/0x9c
[ 2349.725421]  [<ffffffff8043424b>] scsi_scan_host_selected+0xe3/0x12e
[ 2349.731872]  [<ffffffff80434309>] do_scsi_scan_host+0x73/0x7a
[ 2349.737715]  [<ffffffff804345ed>] scsi_scan_host+0x15e/0x1aa
[ 2349.743467]  [<ffffffff880e8c2e>] :mptspi:mptspi_probe+0x36c/0x39e
[ 2349.749756]  [<ffffffff8038798c>] pci_device_probe+0x10a/0x18e
[ 2349.755690]  [<ffffffff803dab18>] driver_probe_device+0xda/0x18d
[ 2349.761801]  [<ffffffff803dacf4>] __driver_attach+0x81/0xda
[ 2349.767463]  [<ffffffff803d99d2>] bus_for_each_dev+0x49/0x6f
[ 2349.773211]  [<ffffffff803dad6c>] driver_attach+0x1f/0x24
[ 2349.778699]  [<ffffffff803da249>] bus_add_driver+0x98/0x1ff
[ 2349.784371]  [<ffffffff803db1e0>] driver_register+0x7b/0x7d
[ 2349.790033]  [<ffffffff80387704>] __pci_register_driver+0x57/0x91
[ 2349.796226]  [<ffffffff880590cc>] :mptspi:mptspi_init+0xcc/0xd1
[ 2349.802235]  [<ffffffff8025605f>] sys_init_module+0x1c8f/0x1da4
[ 2349.808251]  [<ffffffff80209d0e>] system_call+0x7e/0x83
[ 2349.813573]  [<00002b25be0952aa>]
[ 2349.816943]
[ 2349.818484] modprobe      D 00000043d958503c     0  3053   3013 (NOTLB)
[ 2349.825268]  ffff810127fedc18 0000000000000086 0000000000000000 ffffffff8037ca04
[ 2349.832869]  ffff810100000000 ffff81012b5f8810 ffff810129c400c0 0000000500000286
[ 2349.840469]  00000000ffffa711 0000000000000000 ffff810001053400 000000052a050180
[ 2349.847856] Call Trace:
[ 2349.850571]  [<ffffffff804f1b37>] __down+0x97/0x108
[ 2349.855527]  [<ffffffff804f1933>] __down_failed+0x35/0x3a
[ 2349.861025]  [<ffffffff803dacdf>] __driver_attach+0x6c/0xda
[ 2349.866687]  [<ffffffff803d99d2>] bus_for_each_dev+0x49/0x6f
[ 2349.872446]  [<ffffffff803dad6c>] driver_attach+0x1f/0x24
[ 2349.877933]  [<ffffffff803da249>] bus_add_driver+0x98/0x1ff
[ 2349.883604]  [<ffffffff803db1e0>] driver_register+0x7b/0x7d
[ 2349.889276]  [<ffffffff80387704>] __pci_register_driver+0x57/0x91
[ 2349.895468]  [<ffffffff8806101e>] :i2c_nforce2:nforce2_init+0x1e/0x23
[ 2349.902005]  [<ffffffff8025605f>] sys_init_module+0x1c8f/0x1da4
[ 2349.908019]  [<ffffffff80209d0e>] system_call+0x7e/0x83
[ 2349.913326]  [<00002b351a9c92aa>]
[ 2349.916713]

Thanks,
Bernd

Signature · 2 lines
Bernd Schubert
Q-Leap Networks GmbH