Skip to content

DM9000 updates for 2.6.25

Ben Dooks netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest24 patches 14 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/24DM9000: Fix endian-ness of data accesses. Patch from: Laurent Pinchart <[email protected]>drivers/net/dm9000.c+7 -66 replies
2/24DM9000: Add platform data to specify external phy Patch from: Laurent Pinchart <[email protected]>drivers/net/dm9000.c include/linux/dm9000.h+7 -01 reply
3/24DM9000 use dev_xxx() instead of printk for output.drivers/net/dm9000.c+28 -280 replies
4/24DM9000 update debugging macros to use debug leveldrivers/net/Kconfig drivers/net/dm9000.c+27 -350 replies
5/24DM9000: Pass IRQ flags via platform resourcesdrivers/net/dm9000.c+14 -30 replies
6/24DM9000: Remove old timer based poll routinesdrivers/net/dm9000.c+0 -340 replies
7/24DM9000: Add initial ethtool supportdrivers/net/dm9000.c+68 -14 replies
8/24DM9000: Do not sleep with spinlock and IRQs helddrivers/net/dm9000.c+16 -10 replies
9/24DM9000: Use msleep() instead of udelay()drivers/net/dm9000.c+21 -20 replies
10/24DM9000: Remove barely used SROM array read.drivers/net/dm9000.c+11 -130 replies
11/24DM9000: Add mutex to protect accessdrivers/net/dm9000.c+39 -140 replies
12/24DM9000: Add ethtool support for reading and writing EEPROMdrivers/net/dm9000.c+60 -60 replies
13/24DM9000: Add ethtool control of msg_enable valuedrivers/net/dm9000.c+16 -00 replies
14/24DM9000: Remove EEPROM initialisation code.drivers/net/dm9000.c+0 -290 replies
15/24DM9000: Ensure spinlock held whilst accessing EEPROM registersdrivers/net/dm9000.c+20 -00 replies
16/24DM9000: Remove unnecessary changelog in header commentdrivers/net/dm9000.c+5 -400 replies
17/24DM9000: Use netif_msg to enable debugging optionsdrivers/net/dm9000.c+22 -60 replies
18/24DM9000: Fix delays used by EEPROM read and writedrivers/net/dm9000.c+51 -30 replies
19/24DM9000: Remove cal_CRC() and use ether_crc_le insteaddrivers/net/dm9000.c+9 -260 replies
20/24DM9000: Remove redudant use of "& 0xff"drivers/net/dm9000.c+6 -60 replies
21/24DM9000: Add platform flag for no attached EEPROMdrivers/net/dm9000.c include/linux/dm9000.h+16 -00 replies
22/24DM9000: Add support for MII ioctl() callsdrivers/net/dm9000.c+12 -00 replies
23/24DM9000: Update retry count whilst identifying chipdrivers/net/dm9000.c+1 -10 replies
24/24DM9000: Show the MAC address source after printing MACdrivers/net/dm9000.c+7 -30 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/24 for-2.6.25] DM9000 updates for 2.6.25

This patch set is a series of updates for the DM9000 driver, to tidy-up some of the source, stop the accesses to the PHY and EEPROM sitting and spinning with locks held, and to add ethtool support.

This set includes a pair of patches from Laurent Pinchart for addition platform-data based configuration, please apply these from this if you can attribute these correctly to Laurent, otherwise ask Laurent to resubmit. I have signed-off-by both these patches, but would be equally happy acking them.

The only missing item in this series is to replace the old timer based polling code. This series has been sitting long enough on my own trees, and having MII link status reports is not a driver-threatening bug.

Hopefully this series meets up to everyone's approval and can be applied whilst the current merge window is upon us.

Signature · 1 line
Ben