Improve stability USB memory sticks for the common OHCI USB layer.
Get series with b4
b4 am 20080916141047.GA11431@lisaVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [patch 0/3] Improve stability USB memory sticks for the common OHCI USB layer.
Dear Remy,
Quoted 11 lines · Remy Bohmer
This series is a set of patches that are required to make USB sticks behave robust while using U-Boot on a OHCI host.
Several users complain about ERROR: CTL:TIMEOUT errors while using USB sticks, and while testing many different USB sticks it showed that some were working and many don't. It even showed a compiler dependency while debugging this, where GCC 3.x compilers seemed to work (but not always) and GCC 4.x compilers usually don't. While debugging this (with a USB analyser of course) it turned out that U-boot also made several protocol violations that needed to be solved, these resulted in hanging USB devices and so on.
Quoted 7 lines
In a mail thread with Stelian Pop on 28 July it was reported of a known error on Atmel cores that it did not work.
I tested these series on Atmel AT91SAM9261 Core, with the common OHCI driver, GCC 4.2.3 (Code Sourcery G++ Lite 2008q1-126)
REMEMBER: U-boot still supports 1 single USB stick at a time...
Nice work! I'll test and push your patches to the USB repo ASAP (within the next couple of days). I'd welcome any feedback especially from the people who reported the problems you describe.
Thanks for chasing this down!
Best regards
Markus
Signature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de")