Skip to content

Addition of MWDMA/UDMA modes to MPC5200 ATA driver

Grant Likely linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2powerpc/mpc5200: Bestcomm fixes to ATA supportarch/powerpc/sysdev/bestcomm/ata.h arch/powerpc/sysdev/bestcomm/bestcomm.h arch/powerpc/sysdev/bestcomm/bestcomm_priv.h+31 -100 replies
2/2powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driverarch/powerpc/sysdev/bestcomm/ata.c arch/powerpc/sysdev/bestcomm/bestcomm.c arch/powerpc/sysdev/bestcomm/bestcomm_priv.h +1 more+443 -231 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Addition of MWDMA/UDMA modes to MPC5200 ATA driver

Hi all,

This is Tim's series for adding UDMA/MWDMA support to the Freescale MPC5200 ATA device driver. Tested on Genesi's Efika board.

Jeff, if it is okay by you, I'm going to push this through my mpc5200 powerpc tree (after addressing any comments of course) since it only affects the MPC5200 PowerPC SoC.

g.

--
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.

Read the cover letter in its thread