CFI: increase performance
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/2] CFI: increase performance
Quoted 15 lines · Jens Gehrlein
Quoted 14 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 13 lines · Jens Gehrlein
Hi list,
The following patches should increase the performance of the CFI driver, particularly with regard to single word programming mode.
I tested it on TQM5200S with NOR-Flash Samsung K8P2815UQB, which has no write buffer. At least no write buffer, that could be programmed using standard commands.
Performance increase on this TQM is about factor 2.6 (37 KiB/s -> 95 KiB/s). On the same module with Spansion S29GL128N (with write buffer) it is about factor 1.2 (455 KiB/s -> 585 KiB/s).
Quoted 7 lines
Quoted 4 lines
Quoted 3 lines
TQM5200 is a bottom boot module with 2x16 Bit Flash connection. Could someone test the patches on other HW, particularly top boot, other CPU, other flash width, please?
Could you try it against the qemu SVN HEAD
??? Sorry, what is qemu SVN HEAD ???
In qemu you have 2 boards emulated with u-boot support qemu_mips and SX1
it'll be nice to test them also
please note they are only in the SVN tree of qemu
Best Regards,
J.