Skip to content

regulator and MMC updates...

David Brownell linux-omap 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7regulator get_status()Documentation/ABI/testing/sysfs-class-regulator drivers/regulator/core.c include/linux/regulator/driver.h+111 -90 replies
2/7twl4030 regulator uses new get_status() opdrivers/regulator/twl4030-regulator.c+19 -200 replies
3/73430SDP init updatesarch/arm/mach-omap2/board-3430sdp.c+161 -210 replies
4/7minor overo init updatearch/arm/mach-omap2/board-overo.c+14 -00 replies
5/7hsmmc init passes device nodes backarch/arm/mach-omap2/mmc-twl4030.c arch/arm/mach-omap2/mmc-twl4030.h arch/arm/plat-omap/devices.c +1 more+16 -00 replies
6/7beagle regulator updatesarch/arm/mach-omap2/board-omap3beagle.c+16 -00 replies
7/73430SDP regulator updatesarch/arm/mach-omap2/board-3430sdp.c+25 -00 replies

Reviews trailers per patch

1 of 7 patches has a Reviewed-by or Acked-by.

PatchMark Brown
1/7A-b
2/7
3/7
4/7
5/7
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [patch 2.6.29-rc2-omap1-git 0/7] regulator and MMC updates...

Several patches here:

- New interface in regulator core ... in the regulator queue (presumably for 2.6.30 merge)

- twl4030 regulator updates to use that interface

Given that second part, I think the twl4030 regulator code can be submitted upstream.

- Init updates for OMAP 3430 SDP ... regulators, MMC switches, and a bit more.

- Minor Overo init update: set up VMMC1

- HSMMC init update: pass device back so regulator setup can use it. (Not as invasive as a cleaner fix would be...)

- Beagle init update: hook up the regulators used by MMC-1 (relies on that init update)

- SDP init update: hook up regulators used by MMC-1 and MMC-2 (also relies on that init update)

These go on top of patches I sent previously, to work around a lockdep issue in the hsmmc driver (that might go to mainline as a bugfix, assuming that driver goes to mainline for 2.6.29) and correct the mach-omap2/mmc-twl4030.c power switching.

Once that's merged, it'll be ready to start using the regulator calls to switch power for MMC on at least those platforms.

- Dave