Skip to content

Add support for multiple configuration

Jean Delvare lm-sensors 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [lm-sensors] [PATCH 0/6] Add support for multiple configuration

Hi all,

Here is an updated proposal to enable support for multiple configuration files to libsensors. I have hopefully addressed all the constructive comments I received about the first proposal [1]. Thanks Luca and Matt!

[1] http://lists.lm-sensors.org/pipermail/lm-sensors/2009-February/025274.html

 doc/libsensors-API.txt  |    4 +
 lib/access.c            |   17 +++--
 lib/conf-lex.l          |   22 ++++---
 lib/conf-parse.y        |   18 ++---
 lib/conf.h              |    1 
 lib/data.c              |   27 ++++++--
 lib/data.h              |   29 +++++++--
 lib/error.c             |   23 +++++++
 lib/error.h             |   21 +++++-
 lib/init.c              |  150 +++++++++++++++++++++++++++++++++++++++---------
 lib/libsensors.3        |   16 ++++-
 lib/scanner.h           |    2 
 lib/sensors.conf.5      |   20 +++++-
 lib/test/test-scanner.c |    2 
 14 files changed, 276 insertions(+), 76 deletions(-)

Important changes:
* Reloading the configuration files works again (patch 3/6).
* Error handling when configuration files can't be read has been improved. Errors are reported instead of being silently ignored patch 4/6).
* Error reporting now includes the file name (patches 5/6 and 6/6). This makes it much easier to locate and fix mistakes in configuration files.

This last point was implemented by extending the libsensors API with a 3rd error reporting function. I made it backwards compatible, that is, an application which defined a custom function to handle parse errors using the old API will still have it called. The new default parse error handling function is only called if the old handling function is the default one as well. So we should be on the safe side, even though this was probably not needed: I couldn't find any monitoring application actually defining a cutom parse error function.

The patches apply on top of SVN. I would welcome testing and further comments. You can fetch a combined patch at:
http://jdelvare.pck.nerim.net/sensors/libsensors-support-for-multiple-config-files.patch
if it makes testing easier for you.

Thanks,

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors