Skip to content

Some PM-related patches for galak/powerpc.git next

Anton Vorontsov linuxppc-dev 5 versions – Applied

Status from this message: applied to next

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest4 patches 5 repliesApplied
  2. v34 patches 13 repliesSuperseded
  3. v2 posting 2/22 patches 6 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v2 posting 1/21 patch3 repliesSuperseded
v11 patch2 repliesSuperseded

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/4powerpc/83xx: Add power management support for MPC837x boardsarch/powerpc/boot/dts/mpc8377_mds.dts arch/powerpc/boot/dts/mpc8377_rdb.dts arch/powerpc/boot/dts/mpc8378_mds.dts +3 more+323 -1711 reply
2/4powerpc/83xx: Move gianfar mdio nodes under the ethernet nodesarch/powerpc/boot/dts/asp834x-redboot.dts arch/powerpc/boot/dts/mpc8315erdb.dts arch/powerpc/boot/dts/mpc8349emitx.dts +15 more+488 -3931 reply
3/4powerpc/85xx: Move gianfar mdio nodes under the ethernet nodesarch/powerpc/boot/dts/ksi8560.dts arch/powerpc/boot/dts/mpc8536ds.dts arch/powerpc/boot/dts/mpc8540ads.dts +28 more+1183 -10161 reply
4/4powerpc/86xx: Move gianfar mdio nodes under the ethernet nodesarch/powerpc/boot/dts/gef_ppc9a.dts arch/powerpc/boot/dts/gef_sbc310.dts arch/powerpc/boot/dts/gef_sbc610.dts +8 more+237 -1992 replies

Reviews trailers per patch

None of the 4 patches has a Reviewed-by or Acked-by.

PatchMartyn Welch
1/4
2/4
3/4
4/4T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/4] Some PM-related patches for galak/powerpc.git next
Quoted 7 lines · Scott Wood
Quoted 5 lines · Anton Vorontsov
Quoted 1 line · Scott Wood

Hmm, would that imply that the mdio underneath it is disabled as well?

Technically, yes. In practice, MDIO and MAC drivers are probed separately.

Quoted 7 lines

Currently, yes, but that may not always be the case.

Quoted 2 lines

I don't see any better solution, should I just leave the core1's mdio node intact?

Probably. It's not as if core1 is going to be putting ethernet@24000 to sleep.

OK, so the updated patches no longer touch mpc8572ds_camp_core1.dts.

Other changes:

- Now the patch set depends on
"fsl_pq_mdio: Use proper address translation"
http://patchwork.ozlabs.org/patch/24698/

- Newly added gef_ppc9a board converted as well.

Signature · 3 lines
Anton Vorontsov
email: [email protected]
irc://irc.freenode.net/bd2