Skip to content

Serial updates for 2.6.30

Alan Cox lkml 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v1 Latest posting 2/227 patches 0 repliesNew
  2. v1 posting 1/224 patches 0 repliesSuperseded

Patches in v1 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/278250_pnp.c: add another Wacom tabletdrivers/serial/8250_pnp.c+1 -00 replies
2/27serial: Update PNP IDsdrivers/serial/8250_pnp.c+5 -10 replies
3/278250_pci: add support for National Instruments 843x RS232 devicesdrivers/serial/8250_pci.c include/linux/pci_ids.h+207 -00 replies
4/278250_pci: add support for National Instruments legacy 8420 RS232 boardsdrivers/serial/8250_pci.c include/linux/pci_ids.h+230 -00 replies
5/27blackfin: BF538/9 serial uart supportdrivers/serial/Kconfig+1 -10 replies
6/27blackfin: Use unsigned long for flags with irq functionsdrivers/serial/bfin_5xx.c+3 -20 replies
7/27blackfin: Fix tty compile error in PIO modedrivers/serial/bfin_5xx.c+2 -20 replies
8/27Fix DMA rx ring buffer handlingdrivers/serial/bfin_5xx.c+3 -10 replies
9/27blackfin: Subtract ANOMALY_05000230 on quotdrivers/serial/bfin_5xx.c+1 -10 replies
10/27applicom: Auto-load applicom module when device opened.drivers/char/applicom.c+1 -00 replies
11/27cyclades: Auto-load cyclades module when device opened.drivers/char/cyclades.c+2 -00 replies
12/27specialix: Auto-load specialix module when device opened.drivers/char/specialix.c+1 -00 replies
13/27usb: Auto-load cdc_acm module when device opened.drivers/usb/class/cdc-acm.c+1 -10 replies
14/27riscom8: Auto-load riscom8 module when device opened.drivers/char/riscom8.c+2 -00 replies
15/27ucc: Fix leaky error pathdrivers/serial/ucc_uart.c+1 -00 replies
16/27isicom: isicom kref leak fixdrivers/char/isicom.c+1 -00 replies
17/27tty: moxa, fix refcounting in moxa_poll_portdrivers/char/moxa.c+5 -40 replies
18/27mxser: remove tty_port_tty_get from mxser_check_modem_statusdrivers/char/mxser.c+0 -10 replies
19/27jsm: define init function as __devinitdrivers/serial/jsm/jsm_driver.c drivers/serial/jsm/jsm_tty.c+3 -30 replies
20/27jsm: Fix the return variable and removing the unused retval.drivers/serial/jsm/jsm_driver.c+3 -40 replies
21/27mux: fix build probleminclude/linux/serial_core.h+1 -10 replies
22/27icom: remove unused variablesdrivers/serial/icom.c+2 -120 replies
23/27cdc-acm: zydas 1602 identifier neededdrivers/usb/class/cdc-acm.c+3 -00 replies
24/27tty: pl2303 needs identifiers for Siemens S81 as well as EF81drivers/usb/serial/pl2303.c drivers/usb/serial/pl2303.h+5 -00 replies
25/27symbol: Remove various bits of left over junkdrivers/usb/serial/symbolserial.c+0 -670 replies
26/27rio: addition has higher precedence than ?:drivers/char/rio/rio_linux.c+1 -10 replies
27/278250: Fix warningdrivers/serial/8250_pci.c+2 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RESEND PATCH 00/27] Serial updates for 2.6.30

As the previous set but the queue has grown a bit in the meantime. Although these are all fixes and minor things it would be good to actually get them in so some of the annoying bug cures can get pushed on into stable.

Alan

---

Alan Cox (6):
8250: Fix warning
symbol: Remove various bits of left over junk
tty: pl2303 needs identifiers for Siemens S81 as well as EF81
cdc-acm: zydas 1602 identifier needed
isicom: isicom kref leak fix
ucc: Fix leaky error path

Alexander Beregalov (1):
mux: fix build problem

Breno Leitao (3):
icom: remove unused variables
jsm: Fix the return variable and removing the unused retval.
jsm: define init function as __devinit

Danny Kukawka (1):
8250_pnp.c: add another Wacom tablet

Graf Yang (1):
blackfin: Subtract ANOMALY_05000230 on quot

Jiri Slaby (2):
mxser: remove tty_port_tty_get from mxser_check_modem_status
tty: moxa, fix refcounting in moxa_poll_port

Matthew Garrett (1):
serial: Update PNP IDs

Michael Hennerich (1):
blackfin: BF538/9 serial uart support

Mike Frysinger (1):
blackfin: Use unsigned long for flags with irq functions

Roel Kluin (1):
rio: addition has higher precedence than ?:

Scott James Remnant (5):
riscom8: Auto-load riscom8 module when device opened.
usb: Auto-load cdc_acm module when device opened.
specialix: Auto-load specialix module when device opened.
cyclades: Auto-load cyclades module when device opened.
applicom: Auto-load applicom module when device opened.

Shawn Bohrer (1):
8250_pci: add support for National Instruments 843x RS232 devices

Sonic Zhang (2):
Fix DMA rx ring buffer handling
blackfin: Fix tty compile error in PIO mode

Will Page (1):
8250_pci: add support for National Instruments legacy 8420 RS232 boards

 drivers/char/applicom.c           |    1 
 drivers/char/cyclades.c           |    2 
 drivers/char/isicom.c             |    1 
 drivers/char/moxa.c               |    9 -
 drivers/char/mxser.c              |    1 
 drivers/char/rio/rio_linux.c      |    2 
 drivers/char/riscom8.c            |    2 
 drivers/char/specialix.c          |    1 
 drivers/serial/8250_pci.c         |  412 +++++++++++++++++++++++++++++++++++++
 drivers/serial/8250_pnp.c         |    7 +
 drivers/serial/Kconfig            |    2 
 drivers/serial/bfin_5xx.c         |   15 +
 drivers/serial/icom.c             |   14 -
 drivers/serial/jsm/jsm_driver.c   |    9 -
 drivers/serial/jsm/jsm_tty.c      |    4 
 drivers/serial/ucc_uart.c         |    1 
 drivers/usb/class/cdc-acm.c       |    5 
 drivers/usb/serial/pl2303.c       |    1 
 drivers/usb/serial/pl2303.h       |    4 
 drivers/usb/serial/symbolserial.c |   67 ------
 include/linux/pci_ids.h           |   26 ++
 include/linux/serial_core.h       |    2 
 22 files changed, 486 insertions(+), 102 deletions(-)
Signature · 1 line
Signature