Skip to content

OMAP clock/SDRC patches on v2.6.30-rc5

Paul Walmsley linux-omap lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest10 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/10OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memoryarch/arm/plat-omap/sram.c+9 -00 replies
2/10OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpllarch/arm/mach-omap2/sram34xx.S+2 -20 replies
3/10OMAP3 clock: add interconnect barriers to CORE DPLL M2 changearch/arm/mach-omap2/sram34xx.S+6 -30 replies
4/10OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency changearch/arm/mach-omap2/sram34xx.S+4 -30 replies
5/10OMAP3 SDRC: initialize SDRC_POWER at bootarch/arm/mach-omap2/sdrc.c+18 -10 replies
6/10OMAP3 SRAM: renumber registers to make space for argument passingarch/arm/mach-omap2/sram34xx.S+57 -570 replies
7/10OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHzarch/arm/mach-omap2/clock34xx.c arch/arm/mach-omap2/sram34xx.S arch/arm/plat-omap/include/mach/sram.h +1 more+24 -120 replies
8/10OMAP3 clock: use pr_debug() rather than pr_info() in some clock change codearch/arm/mach-omap2/clock.c arch/arm/mach-omap2/clock34xx.c+10 -100 replies
9/10OMAP3 clock: lessen amount of noisy messagesarch/arm/mach-omap2/clock.c+1 -10 replies
10/10OMAP2xxx clock: rename clk_init_one() to clk_preinit()arch/arm/mach-omap1/clock.c arch/arm/mach-omap2/clock24xx.c arch/arm/mach-omap2/clock34xx.c +2 more+6 -60 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/10] OMAP clock/SDRC patches on v2.6.30-rc5

Hello Russell,

This series contains OMAP clock and SDRAM controller patches against v2.6.30-rc5. If you are happy with these, Tony will merge them into his for-next branch for you to pull.

This series includes the clk_init_one() to clk_preinit() rename that we've discussed recently. Most of the patches prepare for CORE DPLL M2 rate changing support.

regards,

- Paul

---

Artem Bityutskiy (1):
OMAP3 clock: lessen amount of noisy messages

Paul Walmsley (9):
OMAP2xxx clock: rename clk_init_one() to clk_preinit()
OMAP3 clock: use pr_debug() rather than pr_info() in some clock change code OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHz
OMAP3 SRAM: renumber registers to make space for argument passing OMAP3 SDRC: initialize SDRC_POWER at boot
OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change OMAP3 clock: add interconnect barriers to CORE DPLL M2 change OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpll OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memory

 arch/arm/mach-omap1/clock.c             |    2 
 arch/arm/mach-omap2/clock.c             |   14 ++-
 arch/arm/mach-omap2/clock24xx.c         |    2 
 arch/arm/mach-omap2/clock34xx.c         |   20 +++--
 arch/arm/mach-omap2/sdrc.c              |   19 ++++-
 arch/arm/mach-omap2/sram34xx.S          |  129 ++++++++++++++++---------------
 arch/arm/plat-omap/clock.c              |    4 -
 arch/arm/plat-omap/include/mach/clock.h |    2 
 arch/arm/plat-omap/include/mach/sram.h  |    6 +
 arch/arm/plat-omap/sram.c               |   16 +++-
 10 files changed, 128 insertions(+), 86 deletions(-)