Skip to content

ath9k: Power save mode fixes

Jouni Malinen linux-wireless 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4ath9k: Fix a check for multicast address for virtual wiphydrivers/net/wireless/ath/ath9k/recv.c+1 -10 replies
2/4ath9k: Clean up RX processing a bitdrivers/net/wireless/ath/ath9k/recv.c+34 -260 replies
3/4ath9k: Fix PS mode operation to receive buffered broadcast/multicast framesdrivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/debug.h drivers/net/wireless/ath/ath9k/recv.c+114 -70 replies
4/4ath9k: Move PS wakeup/restore calls from isr to taskletdrivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/recv.c+9 -161 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] ath9k: Power save mode fixes

This series addresses couple of issues in power save mode operations in ath9k. The driver will now try to receive all buffered broadcast and multicast frames after DTIM beacons. In addition, the transitions between power save states are optimized in a way which should reduce both CPU use and the amount of time spent in awake state. This change seems to also improve the stability of the connection when using power save mode.

There are still some remaining issues in the timeout=0 power save case ("iwconfig wlan0 power on"), but the patches here seem to make the default mode (timeout=500, "iwconfig wlan0 power timeout 500ms") behave much more nicely.

Signature · 1 line
Jouni Malinen                                            PGP id EFC895FA