Skip to content

: arm: Kirkwood: Various egiga fixes

Simon Kagstrom u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4: arm: Kirkwood: Set MAC address during registration for kirkwood egigadrivers/net/kirkwood_egiga.c+2 -03 replies
1/4: arm: Kirkwood: Set MAC address during registration for kirkwood egiga+0 -02 replies
1/4: arm: Kirkwood: Set MAC address during registration for kirkwood egiga+0 -01 reply
2/4: arm: Kirkwood: Fix compiler optimization bug for kwgbe_senddrivers/net/kirkwood_egiga.c+19 -122 replies
3/4: arm: Kirkwood: Check the error summary bit for error detectiondrivers/net/kirkwood_egiga.c drivers/net/kirkwood_egiga.h+4 -11 reply
4/4: arm: Kirkwood: See to it that sent data is 8-byte aligneddrivers/net/kirkwood_egiga.c+20 -63 replies
4/4: arm: Kirkwood: See to it that sent data is 8-byte aligned+0 -01 reply
4/4: arm: Kirkwood: See to it that sent data is 8-byte aligned+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4]: arm: Kirkwood: Various egiga fixes

Hi again!

This is a refreshed version of the
http://lists.denx.de/pipermail/u-boot/2009-July/055370.html patch series. I've added one more patch to fix an issue with the MAC address under Linux. The patches are now:

1. (new) Set MAC address during egiga registration (so that Linux gets it even if the network interface has not been initialized under U-boot).

2. Correct the optimization bug in kgwbe_send. This patch now uses IO accessor functions instead of volatile (and also corrects recv).

3. Check the error summary bit during send (as before but based on the above patches)

4. Allow sending data which is not 8-byte aligned (as before but based on the above patches)

// Simon