Skip to content

Simon Kagstrom u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2: Arm: Kirkwood: Split PHY-related initialization to a common fileboard/Marvell/sheevaplug/sheevaplug.c board/Marvell/sheevaplug/sheevaplug.h drivers/net/phy/Makefile +3 more+100 -372 replies
1/2: Arm: Kirkwood: Split PHY-related initialization to a common file+0 -02 replies
2/2: Arm: Kirkwood: Support for the OpenRD base boardMAINTAINERS MAKEALL Makefile +6 more+490 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [RFC/PATCH 0/2]

Hejsan!

I'm going on vacation for one month on wednesday, so I thought I'd post the OpenRD base patches as they are today. I can fix issues tomorrow as well, but after that I will be offline.

I've tried to integrate the comments posted on the last series (thanks!), although for the split-out-phy support and configure-MAC-for-linux the discussion hasn't really converged yet so I just picked an implementation :-).

Other dependencies:
-------------------

* Fix UBIFS build on arm: http://lists.denx.de/pipermail/u-boot/2009-July/055594.html

* Various Kirkwood egiga fixes: http://lists.denx.de/pipermail/u-boot/2009-July/055724.html
(except the first which is worked around in the board support)

Changes since last patch series:
--------------------------------

* Copyrights have been fixed up: moved functions retain copyrights, attribute originating source where the implementation is based on another file.

* Some MPP pins have been corrected

* The configuration has been extended to include UBIFS support (this is a prototype board after all so I think it makes sense to have a "fat" configuration which can be stripped down)

* I moved mv88e1116.c to drivers/net/phy/ instead. I understand this issue is not settled yet (with generic PHY framework missing etc).

* NAND flash partitions have been corrected

* MPP correction patch has been removed (already applied upstream) and mach-types.h is also untouched.

* Added Maintainer and MAKEALL

* Board ID has been registered at
http://www.arm.linux.org.uk/developer/machines/ (2325), although it's not integrated in Linux yet. This will obviously need to be merged before the OpenRD base board support can go in.

// Simon