Skip to content

mx31moboard: patches for next merge window v2

Sascha Hauer linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] mx31moboard: patches for next merge window v2

Hi Valentin,

Quoted 13 lines · Valentin Longchamp

Here are the patches I would like to push during the next merge window for the mx31moboard platform.

It consists of a fix for a small hardware design issue for the main serial port, a few GPIOs used on the robots that are declared, camera support and finally MC13783 support as it is now getting ready.

For MC13783, we need RTC as well, but it was not tested yet since it is not in mainline yet.

The camera part works for one camera. The soc_camera needs some reworking before we are able to support the two cameras we have on the robot

Quoted 8 lines

The main peripheral that we are using and that still is missing is the USB host, but since the driver still needs a few improvements, I keep it aside for now.

Changes since v1:
- changed the patches order
- support for a single camera
- corrected typos and comments from earlier version

ok, applied to mxc-master.

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |