i.MX31: Activate NAND support for PDK board.
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/2] i.MX31: Activate NAND support for PDK board.
Quoted 14 lines · Magnus Lilja
Hi all,
These patches applies on the previously submitted NAND patches for the i.MX31
(http://lists.denx.de/pipermail/u-boot/2009-November/064213.html).The patches (including the above mentioned patches), applies on the current U-boot tip.
The series add support for large page NAND, using the same layout as the latest Linux driver, for i.MX31 and finally activates general NAND support and specifically NAND environment for the i.MX31 PDK board.
Quoted 7 lines
Magnus Lilja (2):
MXC: Add large page oob layout for i.MX31 NAND controller.
MX31: Activate NAND environment on i.MX31 PDK board.drivers/mtd/nand/mxc_nand.c | 12 ++++++++++++ include/configs/mx31pdk.h | 25 +++++++++++++++++++++---- 2 files changed, 33 insertions(+), 4 deletions(-)
Applied both patchsets.
-Scott