Skip to content

Initial Freescale i.MX51 SoC support

Sascha Hauer linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest0 of 7 patches 0 repliesNew

Patches in v3 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCHv3 0/7] Initial Freescale i.MX51 SoC support

Hi Amit,

Quoted 20 lines · Amit Kucheria

(patchset rebased on top of Sascha's tree and trivial fixes made)
git://git.pengutronix.de/git/imx/linux-2.6.git mxc-master

Will you consider merging it now?

Regards,
Amit

This series of patches adds basic support for i.MX5 family to the kernel. This is just the bare minimum that brings up the board - sets up the clocks, IO with a serial port and timers.

Features:

* Console: Serial console using pre-existing drivers/serial/imx.c
* Timer: Timer provided through arch/arm/plat-mxc/time.c
* Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c
* Clocks: Minimal Clock framework to allow board boot up
* Defconfigs: mx51_defconfig provided

Quoted 5 lines

Tested on a i.MX51-based Babbage 2.5 board.

Git:

repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport

ok, merged for -next. BTW the correct branch is mx51-baseport-sascha. This shouldn't happen with the proper use of git request-pull.

Thanks for your work!

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |