Skip to content

PCI runtime power management for r8169 and e1000e

Rafael J. Wysocki linux-pm netdev 1 version Applied

Status from this message: Applied.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 8 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2r8169 / PCI / PM: Add simplified runtime PM support (rev. 3)drivers/net/r8169.c+125 -272 replies
1/2r8169 / PCI / PM: Add simplified runtime PM support (rev. 3)drivers/net/r8169.c+125 -270 replies
2/2e1000e / PCI / PM: Add basic runtime PM support (rev. 4)drivers/net/e1000e/e1000.h drivers/net/e1000e/netdev.c+138 -274 replies
2/2e1000e / PCI / PM: Add basic runtime PM support (rev. 4)drivers/net/e1000e/e1000.h drivers/net/e1000e/netdev.c+138 -270 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] PCI runtime power management for r8169 and e1000e

Hi,

The following two patches add basic PCI runtime power management to the r8169 and e1000e drivers.

It works so that the adapter is put into PCI D3 if there's no network cable attached to it and back into PCI D0 once the cable has been detected.

The feature is disabled by default and it can be enabled by writing "auto" to the device's /sys/devices/.../power/control file. Writing "on" to this file disables the feature again.

The patches have been tested on MSI Wind U100 (r8169) and Toshiba Portege R500 (e1000e).

Thanks,
Rafael