Skip to content

mx31moboard: OTG host support

Sascha Hauer linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 3 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH 0/3 v2] mx31moboard: OTG host support
Quoted 8 lines · Philippe R?tornaz

Hello

This patch set add the OTG host support for the eyebot robot.

The first patch fix the usb PHY reset so we really do reset and configure the pad pull-up/down so the signal are stable while applying the reset signal (observed with an oscilloscope).

Quoted 6 lines

The last two patches are adding a new number to the mx31moboard_baseboard bootparam so we can choose at boot if we want an usb device or host on the smartbot board.

v2: I've added Acked-by from Valentin on the first two patches, fixed some typo and modified the last patch according to Valentin comment.

Ok, applied.

Sascha

Quoted 17 lines

Regards,
Philippe

Philippe R?tornaz (3):
mx31moboard: Fix usb PHY reset
mx31moboard: Move usb OTG device registration
mx31moboard: OTG host support for smartbot board

 arch/arm/mach-mx3/mach-mx31moboard.c               |  104 +++++++-------------
 arch/arm/mach-mx3/mx31moboard-devboard.c           |    9 ++
 arch/arm/mach-mx3/mx31moboard-marxbot.c            |    8 ++
 arch/arm/mach-mx3/mx31moboard-smartbot.c           |   45 ++++++++-
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |    3 +-
 5 files changed, 100 insertions(+), 69 deletions(-)
Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |