Skip to content

omap3 nand: cleanup exiting platform related code

Tony Lindgren linux-arm-kernel linux-mtd linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v7 Latest0 of 3 patches 0 repliesNew

Patches in v7 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v7 yet.

Read the v7 thread

Cover letter [PATCH v7 0/3] omap3 nand: cleanup exiting platform related code
Quoted 10 lines · Sukumar Ghorai

The following set of patches applies on top of for-next branch.

	http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git

Patches verified on: omap3430-SDP, omap3630-sdp, zoom3 and beagle board

And these are the patches required to address the following input -
1. The NAND driver needs to stop tinkering with the GPMC registers The omap General Purpose Memory Controller (GPMC) registers are omap specific, and not driver specific. Tinkering with these registers can cause issues with the other devices on the GPMC.

Quoted 4 lines

2. Passing hardcoded GPMC_CS0_BASE needs to go from the board files Passing hardcoded GPMC virtual addressess is sure way to mess up things. This should all become unnecessary once the NAND drivers stops messing with the GPMC registers directly.

Thanks, I'll add this series into omap-for-linus.

Regards,

Tony

Quoted 47 lines

Discussion: http://www.mail-archive.com/[email protected]/msg27630.html

No code change from previous version.
Looping linux-arm-kernel mailing list with new version.

Changes in this series -
gpmc_hwcontrol() function in gpmc.c, break into various small function.
v6: http://www.mail-archive.com/[email protected]/msg31936.html

Unused function removed.
v5: http://www.mail-archive.com/[email protected]/msg30305.html

Functions related to ecc and prefetch engine are optimized.
v4: http://www.mail-archive.com/[email protected]/msg29458.html

Few functionality was missing like - There should be some locking as only
one chipselect can use the ECC or prefetch engine at a time. If you have NAND in two chipselects, bad things would happen.
v3: http://www.mail-archive.com/[email protected]/msg28715.html

Additionally, it was needed to implement more functions for the platform init code to use.
v2: http://www.mail-archive.com/[email protected]/msg28467.html

v1: http://www.mail-archive.com/[email protected]/msg28164.html

Sukumar Ghorai (3):
omap3 gpmc: functionality enhancement omap3 nand: cleanup virtual address usages omap3 nand: fix issue in board file to detect nand

 arch/arm/mach-omap2/board-cm-t35.c         |   20 +--
 arch/arm/mach-omap2/board-devkit8000.c     |   25 +---
 arch/arm/mach-omap2/board-omap3beagle.c    |   24 +---
 arch/arm/mach-omap2/board-omap3touchbook.c |   25 +---
 arch/arm/mach-omap2/board-overo.c          |   24 +---
 arch/arm/mach-omap2/board-sdp-flash.c      |    5 -
 arch/arm/mach-omap2/gpmc-nand.c            |   38 +---
 arch/arm/mach-omap2/gpmc.c                 |  285 ++++++++++++++++++++++++++--
 arch/arm/plat-omap/include/plat/gpmc.h     |   42 ++++-
 arch/arm/plat-omap/include/plat/nand.h     |    6 +-
 drivers/mtd/nand/omap2.c                   |  218 ++++++----------------
 11 files changed, 371 insertions(+), 341 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html