Skip to content

add spi support for i.MX51 in the existing spi_imx driver

Uwe Kleine-König linux-arm-kernel linux-spi 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] add spi support for i.MX51 in the existing spi_imx driver

Hello Grant,

Quoted 44 lines · Grant Likely
Quoted 41 lines

Jason Wang (4):
? ? ?ARM: mx5/clock-mx51: add spi clocks
? ? ?ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds board ? ? ?ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds board
? ? ?ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage

Uwe Kleine-K?nig (12):
? ? ?spi/imx: default to m on platforms that have such devices
? ? ?spi/imx: convert driver to use platform ids
? ? ?spi/imx: get rid of more ifs depending on the used cpu
? ? ?spi/imx: save the spi chip select in config struct, not the gpio to use ? ? ?spi/imx: add support for imx51's eCSPI and CSPI
? ? ?ARM: imx: change the way spi-imx devices are registered
? ? ?ARM: imx: use platform ids for spi_imx devices
? ? ?ARM: mx51: clean up mx51 header
? ? ?ARM: mx51: fix naming of spi related defines
? ? ?ARM: mx5: add spi_imx device registration
? ? ?ARM: mx5/clock-mx51: refactor ccgr callbacks to use common code ? ? ?ARM: mx5/clock-mx51: new macro that defines a clk with all members

?arch/arm/mach-imx/clock-imx1.c ? ? ? ? ? ? ? ? ?| ? ?2 +-
?arch/arm/mach-imx/clock-imx21.c ? ? ? ? ? ? ? ? | ? ?6 +-
?arch/arm/mach-imx/clock-imx27.c ? ? ? ? ? ? ? ? | ? ?6 +-
?arch/arm/mach-imx/devices-imx21.h ? ? ? ? ? ? ? | ? ?9 +-
?arch/arm/mach-imx/devices-imx27.h ? ? ? ? ? ? ? | ? 12 +-
?arch/arm/mach-mx25/clock.c ? ? ? ? ? ? ? ? ? ? ?| ? ?6 +-
?arch/arm/mach-mx25/devices-imx25.h ? ? ? ? ? ? ?| ? 12 +-
?arch/arm/mach-mx3/clock-imx31.c ? ? ? ? ? ? ? ? | ? ?6 +-
?arch/arm/mach-mx3/clock-imx35.c ? ? ? ? ? ? ? ? | ? ?4 +-
?arch/arm/mach-mx3/devices-imx31.h ? ? ? ? ? ? ? | ? 12 +-
?arch/arm/mach-mx3/devices-imx35.h ? ? ? ? ? ? ? | ? ?9 +-
?arch/arm/mach-mx5/Kconfig ? ? ? ? ? ? ? ? ? ? ? | ? ?1 +
?arch/arm/mach-mx5/board-mx51_3ds.c ? ? ? ? ? ? ?| ? 33 ++
?arch/arm/mach-mx5/clock-mx51.c ? ? ? ? ? ? ? ? ?| ?113 ++++-
?arch/arm/mach-mx5/devices-imx51.h ? ? ? ? ? ? ? | ? 18 +
?arch/arm/plat-mxc/devices/platform-spi_imx.c ? ?| ? 89 +++-
?arch/arm/plat-mxc/include/mach/devices-common.h | ? 11 +-
?arch/arm/plat-mxc/include/mach/iomux-mx51.h ? ? | ? ?5 +
?arch/arm/plat-mxc/include/mach/mx51.h ? ? ? ? ? | ?608 +++++++++++------------
?drivers/spi/Kconfig ? ? ? ? ? ? ? ? ? ? ? ? ? ? | ? 16 +
?drivers/spi/spi_imx.c ? ? ? ? ? ? ? ? ? ? ? ? ? | ?394 ++++++++++++---
Quoted 2 lines

?21 files changed, 919 insertions(+), 453 deletions(-) ?create mode 100644 arch/arm/mach-mx5/devices-imx51.h

Quoted 5 lines

I'm fine with this series.

What tree do you want to merge them through?

I thought that the five patches touching drivers/spi should go via your tree, the others via Sascha's. Assuming this is OK for you, too, do you prefer to pick the patches out here or should I prepare a branch with these patches for you to pull?

Best regards
Uwe

Signature · 2 lines
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |