Skip to content

arm/versatile PCI support, second try

Arnd Bergmann linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 7 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/7] arm/versatile PCI support, second try
Quoted 5 lines · Colin Tuckley
Quoted 5 lines
Quoted 4 lines

With lots of help and testing from Peter Maydell, I've completed a second version of the PCI support for the versatile platform, which works much better now on real hardware, although it does not improve existing qemu setups.

Quoted 7 lines
Quoted 2 lines

I've got nothing better to do tonite than playing with the PB1176 board so tried this out...

Note that the PB1176 and EB are in mach-realview rather than mach-versatile like the PB926. This complicates the PCI side of things since the other boards in mach-realview have a different PCI implementation (via a NEC custom Northbridge chip).

Yes, I know that. All of them use plat-versatile though, which is where the common code sits.

All the code I added is either specific to the xilinx PCI implementation or specific to one of the boards (pb926, pb1176, eb).

Quoted 2 lines

I am just about to push the PCI code patches for these boards (PBA8, PB11MPCore and PBX) to the list.

I don't expect any conflicts besides my patch 5/7, which will get obsoleted by your patch. If you apply both series, we should be able to enable both Xilinx and NEC PCI support on mach-realview and have it work on all the boards.

Arnd