Skip to content

IPVS: Backup Adding Ipv6 and Persistence support

Hans Schillstrom lvs-devel 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest0 of 3 patches 3 repliesIn review
  2. v24 patches 44 repliesSuperseded
  3. v1 RFC4 patches 14 repliesSuperseded

Patches in v3 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [v3 PATCH 0/3] IPVS: Backup Adding Ipv6 and Persistence support

This patch series adds/(updates) the following functionality in the synchronization between master and backup daemons.

- IPv6
- Persistence Engine
- Firewall marks transferred
- Time-outs transferred.
- Flag field increased to 32 bits.

Note:
This patches depends on Patch 1-9 in staging branch:
"IPVS: Backup, Prepare for transferring firewall marks (fwmark) to the backup daemon." to ...
"IPVS: skb defrag in L7 helpers"

A new message format is also introduced, not understood by old backup daemons. For compatibility reasons receiving the old version (version 0) is still possible. Old (version 0) backups will just drop new (Version 1) messages.
It's also possible to send sync msg in version 0 format, by sysctl #sysclt -w net.ipv4.vs.sync_version=0

Update scenario:
Update the Machine with Bakup daemon first.

Message structure:
A new 32 bit word is added to the header,
where the old count_Conns is set to 0 so old Backup daemons just will drop the packet. Added is version (1) and there is also a spare 16 bit field at the end. This is a reworked version based upon Simon Hormans work.

Version 1:
Note, first byte should be Zero, so ver 0 receivers will drop the packet.

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 0 | SyncID | Size |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Count Conns | Version | Reserved, set to Zero |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| IPVS Sync Connection (1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| . |
~ . ~
| . |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| IPVS Sync Connection (n) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Version 0 Header
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Count Conns | SyncID | Size |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IPVS Sync Connection (1) |

The Sync. Conn. message format is also changed to allow future enhancements and versions.

Sync Connection format (sync_conn)

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Protocol | Ver. | Size |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Flags |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| State | cport |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| vport | dport |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| fwmark |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| timeout (in sec.) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ... |
| IP-Addresses (v4 or v6) |
| ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Optional Parameters.

      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | Param. Type    | Param. Length |   Param. data                |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+                               |
      |                              ...                              |
      |                               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                               | Param Type    | Param. Length |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                           Param  data                         |
      |         Last Param data should be padded for 32 bit alignment |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

New fields that might need some explanation,

Type:
Bit 7 6 . . . 1 0

    +--------------------------------------------------+-------+
    |                      Spare                       |  IPv6 |
    +--------------------------------------------------+-------+

Bit 0 = 1 This sync_conn contains IPv6 addresses.

Ver. Version of specified type right now it's 0

fwmark: Firewall mark from skb.

timeout: from ip_vs_conn struct, converted to sec.

Optional Parameters will be added at the end without any kind of alignment each Param will have a header of two bytes

Param. header
Bit 7 6 . . . 0 7 0

   +----------+----------------------+---------------------------+
   | Optional |  Parameter Type      |  Parameter length         |
   +----------+----------------------+---------------------------+
   |  Data ...                                                   |
   |  ...                                                        |
   +----------+----------------------+---------------------------+

Bit 7 (msb) Optional Param, conn. entry could be keept, if not type
is unknown.
Bit 6-0 Option Type defined below

#define IPVS_OPT_SEQ_DATA       1
#define IPVS_OPT_PE_DATA        2
#define IPVS_OPT_PE_NAME        3

Option Length, 1-255 bytes 0 is an illegal value.

PATCH STATUS:
- Persistence data is not tested.

THANKS
To Julian and Simon for the review and alternative solutions.

*v3
New: Ability to send ver. 0 sync messages.
Optional data, renamed to Optional parameter
Corrections, see comments in each patch,

*v2
Simplified fwmark handling patch 1/4
New handling of optional data patch 2/4
Seconds in timeout
Basically all changes is based on Julians and Simons comments on the RFC For details see individual patches.
--
Regards
Hans Schillstrom <[email protected]>