Skip to content

RFC ARM: imx: Add initial i.MX28 support

Sascha Hauer linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 11 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 11 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support

Hello Shawn,

Quoted 3 lines · Shawn Guo

This patchset adds the initial support of i.MX28, and the target device is i.MX28 EVK Rev C. It's based on the imx-single-kernel branch below, and adding codes into arch/arm/mxc and arch/arm/mach-imx.

Without further looking at the patch I agree with Uwe: The i.MX23/28 are totally different from the other i.MX SoCs and should not be integrated in current i.MX support. And definitely it should not be integrated by adding cpu_is_* into each and every function.

Now you have two choices: Add the code to plat-stmp3xxx (for the interested reader: the i.MX23/28 are based on former Sigmatel SoCs), or add a new mach-mxs like you did in the Freescale Kernel.
I'm not sure which choice of these two is best. It would be good to get some other opinions from people who already had the situation that a vendor got sold and we get the same old metal with new names.

BTW the imx-single-kernel branch is a branch to show where things might or might not go. You should not base your work on this.

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |