Skip to content

some more imx patches for 2.6.38

Sascha Hauer linux-arm-kernel linux-media 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 51 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 51 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/51] some more imx patches for 2.6.38
Quoted 17 lines · Shawn Guo

Hi Uwe,

2010/11/18 Uwe Kleine-K?nig <[email protected]>:

Quoted 5 lines

Hello,

Some of the patches in this series are already in Sascha's tree, I resend them because several of them got minor fixes.

Quoted 9 lines

The highlights are that for most devices for i.MX1, i.MX21, i.MX25 and i.MX27 are allocated dynamically which reduces the memory footprint of the kernel. ?Moreover I moved support for i.MX25 to mach-imx targeting a multi-SoC-kernel for i.MX.

Later I want to do the same for mx3. ?I'm not sure about mx5 though. The discussion about integrating support for i.MX28 into mach-imx made me questioning if this is sensible. ?Well, we'll see.

Quoted 5 lines

You are moving mach-mx25 into mach-imx, will do the same for mx3, and thinking about the same for mx5. But you are asking me to move mx28 out of mach-imx. This only makes sense for me if you think mx28 will not go into mach-imx forever. Are you sure about this? Otherwise we are doing something really bothering ourselves.

All i.MX (not i.MX23/28) share the same irq code, timer code, gpio code, iomuxer code and audio muxer code; admittedly in different variants. So it makes sense to put them together. All the i.MX28 has in common with the other i.MX is the fec, which is under drivers/net anyway. If we start to put i.MX23/28 into mach-imx we could equally well start to put mach-s3c or whatever there, too.
I know that it's technically possible to do this, and I also think that it's possible in a performance friendly way, but at this point it starts to get an architecture wide ARM problem and not a mach-* problem anymore.

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |