Skip to content

iMX51 usb fixes

Arnaud Patard (Rtp) linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ehci-mxc: Enable vbus later+0 -02 replies
1/5ehci-mxc: Enable vbus later+0 -00 replies
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -02 replies
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
2/5ulpi: handle ULPI_OTG_CTRL_CHRGVBUS+0 -01 reply
3/5arch/arm/plat-mxc/ehci.c: fix errors/typos+0 -00 replies
4/5MX51: Add support for usb host 2+0 -00 replies
5/5mx51: fix usb clock support+0 -00 replies

Reviews trailers per patch

None of the 12 patches has a Reviewed-by or Acked-by.

PatchSascha Hauer
1/5T-b
1/5T-b
2/5
2/5
2/5
2/5
2/5
2/5
2/5
3/5
4/5
5/5

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [patch 0/5] iMX51 usb fixes

This patchset aims at fixing several issues I found in the usb support for iMX51 while working on the Genesis EFIKAMX/EFIKASB systems. The most "annoying" one is the usb clock patch. I found out that when the clocks are not properly enabled my system just hangs when trying to read a usb register. So far, I guess only luck (or different bootloader behaviour) may explain that nobody got hit by this.

Warning:
It has been tested on both devices against Sascha's imx-for-2.6.38 branch. It's possible that some of them apply against current mainline but I can't test such a configuration.

Arnaud