Skip to content

PL011 DMA support

Russell King - ARM Linux linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest6 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6ARM: PL011: Ensure error flags are clear at startupdrivers/serial/amba-pl011.c+4 -00 replies
2/6ARM: PL011: Separate hardware FIFO size from TTY FIFO sizedrivers/serial/amba-pl011.c+5 -30 replies
3/6ARM: PL011: Ensure IRQs are disabled in UART interrupt handlerdrivers/serial/amba-pl011.c+3 -20 replies
4/6ARM: PL011: Allow better handling of vendor datadrivers/serial/amba-pl011.c+27 -240 replies
5/6ARM: PL011: Add support for transmit DMAdrivers/serial/amba-pl011.c include/linux/amba/serial.h+516 -21 reply
6/6ARM: PL011: add DMA burst threshold support for ST variantsdrivers/serial/amba-pl011.c include/linux/amba/serial.h+27 -00 replies

Reviews trailers per patch

None of the 6 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchLinus Walleij
SeriesA-b
1/6
2/6
3/6
4/6
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/6] PL011 DMA support

Re-post of the previous set, but using writew() instead of writew_relaxed(). writew_relaxed() is not part of the MMIO accessor API, and so should not be used in drivers which may be used on other architectures.

Also copying Dan for his review of the DMA engine use.