Skip to content

RFC Tegra Harmony: Device Tree Initial Steps

John Bonesio linux-arm-kernel linux-devicetree linux-tegra 1 version In review

Get series with b4
b4 am 20110510201108.22693.50319.stgit@riker

Versions newest first

  1. v1 RFC Latest2 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2ARM: Tegra: Device Tree Support: Update how sdhci devices are initializedarch/arm/mach-tegra/Makefile arch/arm/mach-tegra/board-dt.c+27 -8010 replies
2/2ARM: Tegra: Device Tree Support: Add i2c devicesarch/arm/boot/dts/tegra250.dtsi arch/arm/mach-tegra/board-dt.c drivers/i2c/busses/i2c-tegra.c+69 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC 0/2] Tegra Harmony: Device Tree Initial Steps

These patches are the first steps towards getting the board specific devices on the Tegra Harmony board to be discovered and initialized using only a device tree - rather than platform specific code. In particular, this patch set is getting ready to initialize i2c devices based solely on a device tree.

This patch series is presented at this time only for review and comments.

---

John Bonesio (2):
ARM: Tegra: Device Tree Support: Update how sdhci devices are initialized
ARM: Tegra: Device Tree Support: Add i2c devices

 arch/arm/boot/dts/tegra250.dtsi |   33 +++++++++++
 arch/arm/mach-tegra/Makefile    |    1 
 arch/arm/mach-tegra/board-dt.c  |  120 ++++++++++++++++-----------------------
 drivers/i2c/busses/i2c-tegra.c  |    4 +
 4 files changed, 87 insertions(+), 71 deletions(-)
Signature · 1 line
- John

Read the cover letter in its thread