bcma: add support for embedded devices like bcm4716
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest0 of 11 patches 0 repliesNew
- v2 posting 2/20 of 11 patches 0 repliesSuperseded
- v2 posting 1/20 of 11 patches 0 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 0 of 11 patches | 0 replies | Superseded |
Patches in v3 No applies recorded yet
None of the 11 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716
Quoted 12 lines · Hauke Mehrtens
This patch series adds support for embedded devices like bcm47xx to bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and replaced ssb used on older devices. With these patches my bcm4716 device boots up till it tries to access the flash, because the serial flash chip is unsupported for now, this will be my next task. This adds support for MIPS cores, interrupt configuration and the serial console.
These patches are not containing all functions needed to get the SoC to fully work and support every feature, but it is a good start. These patches are now integrated in OpenWrt for everyone how wants to test them.
Quoted 8 lines
This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716 device and a pcie wireless card supported by bcma.
@John could you please merge this into wireless-testing. I hope Ralf is fine with it when some MIPS bits will go through wireless. This will make it much easier for Linus to merge wireless-testing and the mips tree together as there are many other changes for bcma in wireless- testing.
Any chance we could see an ACK from Ralf?
John
Signature · 2 lines
John W. Linville Someday the world will need a hero, and you linville at tuxdriver.com might be all we have. Be ready.