Skip to content

add the GPMI controller driver for IMX23/IMX28

Marek Vasut linux-arm-kernel linux-mtd 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v8 Latest0 of 3 patches 0 repliesNew

Patches in v8 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.

Read the v8 thread

Cover letter [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28
Quoted 1 line · Koen Beel

On Fri, Jul 29, 2011 at 2:41 PM, Lothar Wa?mann <[email protected]>

Quoted 6 lines · wrote:
Quoted 6 lines

Hi,

Quoted 3 lines · Koen Beel

Hi,

On Fri, Jul 29, 2011 at 9:20 AM, Lothar Wa?mann <[email protected]>

Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

Hi,

Quoted 5 lines · Koen Beel

Hi,

I have test on mx23evk board. Still see the same issues.

On Wed, Jul 27, 2011 at 3:53 AM, Huang Shijie <[email protected]>

Quoted 47 lines · wrote:
Quoted 47 lines
Quoted 31 lines
Quoted 24 lines
Quoted 24 lines
Quoted 23 lines

Hi,

Thanks for your test.

Quoted 19 lines

Hi,

It's not really working for me.
I've applied all gpmi-nand driver patches and the dma driver patches.

I have added following kernel parameters:
mtdparts=gpmi-nand:20m(boot),-(user) ubi.mtd=1 root=ubi0:rootfs0 rootfstype=ubifs gpmi_debug_init

During boot I get already get DMA timeout:

[    2.560000] [ start_dma_without_bch_irq : 392 ] DMA timeout,

last DMA

:1

[    3.560000] [ start_dma_with_bch_irq : 427 ] bch timeout!!!

...
(see log file in attach line 89)

Quoted 6 lines
Quoted 2 lines

I still see this DMA timeout when booting.
What kernel parameters do you use? I still use same as above.

Do you have an SD card in the system? I'm getting the same error when accessing an SD card. Without SD card I can use the flash without any errors.

Quoted 8 lines

No SD card in the system. At least not on my mx23evk board. My real target hardware has a SDIO wifi chip.

Are you also testing on the mx23evk board? Really strange it is not reproducible here then.
Anyone using mx23evk please give:
- revision number of board (I have tested on rev C1)
- kernel parameter used (see previous mail for mine)

It's getting ever more strange. I only have problems with concurrent access to the flash and SD-card when I do file system based accessed to the SD card.
A 'dd if=/dev/mmcblk0 of=/dev/null' while excessively using the flash works well, while mounting the SD card and doing an 'ls' produces immediate BCH DMA timeouts.

Quoted 6 lines
Quoted 1 line

Perhaps someone can make anything out of that.

I have checked and the function dma_irq_callback is never called during my tests. This means the DMA transfer does not even works once.

Also no clue here ...

Aren't you getting some undervolt on the powerrail for example ? btw the driver looks a bit crappy to me, but let's believe it works ;-)

Quoted 17 lines
Quoted 5 lines

Lothar Wa?mann
--
___________________________________________________________

Quoted 7 lines

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel