mx5: USB host support for mx51evk and mx53loco
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 5 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/5] mx5: USB host support for mx51evk and mx53loco
Quoted 15 lines
This patches series provides USB host support for the mx51evk and mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc and uses the header files of the ehci-fsl interface. The callback
board_ehci_hcd_init()allows to do board-specific setup when USB is started.Wolfgang.
Wolfgang Grandegger (5):
mx5: add helper functions to enable USB clocks
mx5: add helper function to retrieve the GPIO number
mx5: add generic USB EHCI support for mx51 and mx53
mx53loco: add end enable USB host support on port 1
mx51evk: add end enable USB host support on port 1
Quoted 14 lines
arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++ arch/arm/include/asm/arch-mx5/clock.h | 5 + arch/arm/include/asm/arch-mx5/crm_regs.h | 3 + arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 + board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++ board/freescale/mx53loco/mx53loco.c | 10 ++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mx5.c | 174 +++++++++++++++++++++++++++++ include/configs/mx51evk.h | 13 ++ include/configs/mx53loco.h | 13 ++ include/usb/ehci-fsl.h | 10 ++ 11 files changed, 397 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/ehci-mx5.c
Hi,
isn't Jana already doing this kind of USB support for mx5 based on my old patches? You didn't notice?
M