USB: Fix EHCI to work with data cache enabled
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/4] USB: Fix EHCI to work with data cache enabled
Dear puneets,
Quoted 6 lines
Dear Marek,
After applying these 4 patches I don't see any alignment spew and it detects the
mass storage device perfectly though I see a warning "EHCI timed out on TD - token=0x80008c80"
consistently in each "usb reset".
That's something else (unrelated to this patchset), I saw it in your backlog too. Can you try debuging it on top of these patches? Because these patches fix a lot of other issues, so let's take them as a base for now. Also, did you really test dos partition table and vfat? I had to fix them to work with patches, you change to part_dos.c wasn't enough.
Quoted 43 lines
Thanx & Regards,
PuneetQuoted 30 lines · Marek Vasut
Dear Marek Vasut,
Quoted 21 lines
This patchset reworks the USB core and EHCI-HCD to work with data caches.
Marek Vasut (3):
USB: Drop ehci_alloc/ehci_free in ehci-hcd
USB: Drop cache flush bloat in EHCI-HCD
USB: Document the QH and qTD antics in EHCI-HCDPuneet Saxena (1):
USB: Align buffers at cachelinecommon/cmd_usb.c | 3 +- common/usb.c | 22 ++-- common/usb_hub.c | 27 ++-- common/usb_storage.c | 59 +++++----- disk/part_dos.c | 2 +- drivers/usb/host/ehci-hcd.c | 284++++++++++++++-----------------------------
include/scsi.h|Quoted 6 lines
4 +-include/usb.h | 4 +- 8 files changed, 155 insertions(+), 250 deletions(-)Cc Puneet Saxena<[email protected]>Quoted 7 lines
Puneet, can you please test this stuff? It should fix your cache misalignment issues. Mine are now gone and USB works with caches on too.
I'd like to queue this for -next.
Best regards,
Marek Vasut
Quoted 8 lines
---------------------------------------------------------------------------
-------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
---------------------------------------------------------------------------
--------
Best regards,
Marek Vasut