preliminary work for adding imx6q_sabrelite usb support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 7 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH v1 0/7] preliminary work for adding imx6q_sabrelite usb support
Dear Peter Chen,
Quoted 20 lines
Quoted 8 lines
Quoted 1 line
Yes, I'd prefer to.
Me too. I think we can start with review each other's patch.
Quoted 2 lines
Richard, are these 7 patches the only stuff that I have to apply on top of linux-usb/usb-next to get this working?
Yes.
Hi Marek and Richard,
The i.mx28 and i.mx6q use the same USB controller and USB PHY, Your patchset can be totally the same, only different is platform part. Below are my commnets for your patchset:
- Usedrivers/usb/otg/mxs-phy.cas PHY's driver.
- Usedrivers/usb/chipidea/ci13xxx_imx.cas controller's driver, all freescale usb uses the same controller.
- Use DT for platform support, phandle can work around current multi-phy support problem.
Quoted 5 lines
My proposal how you work together (already discussed with richard)
- Richard picks marek's controller's patch, and add DT support for i.mx28, send marek, me, shawn privately.
- Marek tunes this DT patched patchset at i.mx28 platform, and add Signed-off-by: Richard Zhao <[email protected]>
You mean SoB by me, dont you ? ;-)
Quoted 8 lines
for patchset, and send to mail list for review
- Richard tests it and give some comments if there is any problems at i.mx6q.
- Marek re-sends this patchset to mail list for reviewMarek, if you agree with it, please take the responsibilities of the owner with this patchset, and be active during this patchset review procedure.
Fine with me, where can I get DT-enabled MXS kernel tree please?
Best regards,
Marek Vasut