Skip to content

arm/dts: Add device tree data for AM33XX devices

Tony Lindgren linux-arm-kernel linux-devicetree linux-omap 7 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest2 of 3 patches 0 repliesNew
  2. v5 posting 2/21 of 3 patches 0 repliesSuperseded
  3. v5 posting 1/21 of 5 patches 0 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v43 patches0 repliesSuperseded
v2 posting 2/21 of 2 patches0 repliesSuperseded
v2 posting 1/22 patches0 repliesSuperseded
v11 of 2 patches0 repliesSuperseded

2 of 3 patches are in this archive. The cover letter announces 3.

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm/dts: AM33XX: Add basic pinctrl device tree data+0 -00 replies
2/3arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone+0 -00 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchTony Lindgren
1/3A-b
2/3A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v7 thread

Cover letter [PATCH v7 0/3] arm/dts: Add device tree data for AM33XX devices
Quoted 16 lines · Benoit Cousson

Hi Anil,

Quoted 13 lines · Chimata
Quoted 11 lines · Chimata

Add pinctrl and d_can device tree data to AM33XX family of devices. First two patches add support for pinctrl DT data and third one adds dcan DT data.

Reason behind combining these patches is to apply cleanly on linux-omap tree, because these are sequential patches.
Yes,
These patches were tested on AM335x-Bone, AM335x-EVM and based on linux-omap:master with this patch
http://www.mail-archive.com/linux-omap at vger.kernel.org/msg74393.html

Quoted 5 lines
Quoted 2 lines

If there are no changes in this patch series ACK from reviewers (esp. Tony, koen and Marc) will help.

Yes, indeed. The series looks good to me, but it will be nice to get some acks from people who commented previous revision.

Acked two of them, but there's still some gpio-leds.c discussion going on that should be resolved first.

Tony