gpio-twl4030: add new device tree properties
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 2 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 0/2] gpio-twl4030: add new device tree properties
Quoted 31 lines · Benoit Cousson
Hi Florian,
Quoted 8 lines · Florian Vaussard
Hello,
A number of platform data are missing when using twl4030/gpio from a device tree. This patchset adds the missing properties, updates the documentation with the new bindings, and updates existing device trees. It mainly enables LEDA and LEDB outputs, as well as pullups / pulldowns on GPIOs.
Quoted 8 lines
The 1st patch changes the device driver and updates the documentation. The 2nd patch updates the device trees for BeagleBoard and omap3-evm.
Changes since v1:
- Patches on driver and documentation merged into the same patch
- Put device trees' values in hexadecimal
- Handle bool property usingof_property_read_bool()
- Prefix the patches with the correct conventionThanks for the update.
Quoted 1 line
Tested on Gumstix Overo. V1 was tested on omap3-evm by Vaibhav Hiremath.
I've just tested it on beagle xM. I can play with D12 led using:
echo 255 > /sys/class/leds/beagleboard\:\:pmu_stat/brightness
Tested-by Benoit Cousson <[email protected]>
Quoted 8 lines
Quoted 1 line
BTW: who will merge this?
Since Linus already acked it, Tony can merge it.
Tony,
I can add that series in my DTS series for 3.7 if you want.
Yes please do thanks.
Tony